Konica Minolta bizhub C652DS ユーザーズマニュアル

bizhub C652/C652DS/C552/C552DS/C452

7-16

Adjust the vertical position of the punched holes for each paper size.

0

Before making any adjustments, create a sample using the punch settings. Adjust the punched hole 
position while checking the created sample.

0

This adjustment is available if the Finisher FS-526 and Punch Kit PK-516 are installed.

Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] 
ö [Finisher Adjustment] ö [Punch Vertical Position Adjustment]. 

Select the paper size to adjust the vertical punch position.

Press [+] or [-] to adjust the punched hole position while checking the sample.

Press [OK].

Create a sample, and check the print result.

Adjust the horizontal position of the punched holes. Adjust the horizontal position of the punched holes as 
appropriate for each installed option or paper type.

0

Before making any adjustments, create a sample using the punch settings. Adjust the punched hole 
position while checking the created sample.

0

The horizontal position of the punched holes can be adjusted as appropriate for each installed option 
if the finisher FS-526, punch kit PK-516, and post inserter are installed.

0

This adjustment is available for each paper type if the Finisher FS-527 and Punch Kit PK-517 are 
installed.

Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] 
ö [Finisher Adjustment] ö [Punch Horizontal Position Adjustment].

% Select an option to adjust the horizontal position of the punched holes if the post inserter is installed.

% First, select the paper type if the finisher FS-527 and punch kit PK-517 are installed.

Press [+] or [-] to adjust the punched hole position while checking the sample.

Press [OK].

Create a sample, and check the print result.