Konica Minolta bizhub C652DS ユーザーズマニュアル

bizhub C652/C652DS/C552/C552DS/C452

7-23

Configure auto reset settings.

0

All settings performed in the following tabs during operation using the copy function are automatically 
reset to the initial settings after the specified time has elapsed.
Basic tab, Original Setting tab, Quality/Density tab, Application tab

0

Even if [OFF] is selected for System Auto Reset Time, the system auto reset function operates when 
this machine is not used for one minute during user authentication/account track operations.

%

Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Reset Settings].

System Auto Reset

Priority Mode

Configure a mode to be displayed in the system 
auto reset mode.

System Auto Reset 
Time

Configure whether to perform system auto reset.
Specify a time until the initial screen appears if 
this machine is not operated. The specified time 
is not canceled.

d

If user authentication or enhanced se-
curity mode is enabled, the adminis-
trator settings mode or user 
authentication mode is logged off ac-
cording to the setting for System Auto 
Reset Time.

In the enlarge display mode, the sys-
tem auto reset mode is disabled.

Auto Reset

Configure whether to perform auto reset in the selected mode.
Specify a time until the basic settings screen appears and the settings are 
reset to the initial values if this machine is not operated.

Job Reset

When Account is 
changed

Configure whether to reset the settings when you 
log off if the user authentication or account track 
settings have been configured.

When original is set 
on ADF

Configure whether to reset the settings when an 
original is loaded in the ADF. 

Next Job

Configure whether to reset the following settings 
when the next job is selected.
•

Staple Setting

•

Original Set/Bind Direction

•

Reset Data After Job

The destination of data is always reset.