Sharp DX-B450P ユーザーズマニュアル
3-10
User’s Guide
Operator Panel Menus
Operator Panel
RTS On1/Off1
On/Off
Off
If On, the RTS signal will reflect the Online/
Offline status.
Offline status.
RTS Error
On/Off
Off
If On, the RTS signal will reflect the Error
status.
status.
XON Ready/Busy
On/Off
On
If On, the XON response will reflect the
Ready/Busy status.
Ready/Busy status.
XON On1/Off1
On/Off
On
If On, the XON response will reflect the
Online/Offline status.
Online/Offline status.
XON Error
On/Off
Off
If On, the XON response will reflect the
Error status.
Error status.
DTR Polarity
High
Low
Low
High
Polarity for DTR
RTS Polarity
High
Low
Low
High
Polarity for RTS
Robust XON
On/Off
Off
Send Multiple XON codes.
Delay Out Close
On/Off
Off
When ON, the printer will wait until the job
is completely printed and delivered to the
output tray before terminating the
connection, allowing all reverse-channel
data to be sent back to the host. This will
cause a reduction in printer throughput.
When OFF, reverse-channel data generated
after the job interpretation is discarded. No
reduction in printer throughput occurs.
is completely printed and delivered to the
output tray before terminating the
connection, allowing all reverse-channel
data to be sent back to the host. This will
cause a reduction in printer throughput.
When OFF, reverse-channel data generated
after the job interpretation is discarded. No
reduction in printer throughput occurs.
Binary PS
On/Off
On
When On, the feature allows all binary codes
to be processed by the PostScript interpreter.
When Off, special binary control codes may
be intercepted per the Format item setting.
to be processed by the PostScript interpreter.
When Off, special binary control codes may
be intercepted per the Format item setting.
ETX/ACK
On/Off
Off
Network 1 Setup
This submenu allows you to set up the
Network interface.
Network interface.
Interpreter
Auto Switch
PCL
PostScript 3
PCL
PostScript 3
Auto Switch
Format
Raw
Normal
Binary
Normal
Binary
Raw
Configures how incoming print jobs are
scanned for special binary control codes.
RAW=no processing
Normal = “Adobe Standard Protocol” (ASP)
Binary = “Binary Control Protocol” (BCP)
When Interpreter setting is Auto Switch and
this setting is Raw, the printer will
automatically determine the control code
method, defaulting to Normal if no codes are
found.
scanned for special binary control codes.
RAW=no processing
Normal = “Adobe Standard Protocol” (ASP)
Binary = “Binary Control Protocol” (BCP)
When Interpreter setting is Auto Switch and
this setting is Raw, the printer will
automatically determine the control code
method, defaulting to Normal if no codes are
found.
Menu Item
Value
Default
Description