Panasonic DMC-FX33 ユーザーズマニュアル

ページ / 128
Advanced (Playback)
90
VQT1J82
• DPOF settings on the original picture data 
will not be copied. Set the DPOF settings 
again after copying is finished. (P83)
• When copying clipboard pictures onto a 
card, select [COPY] on the clipboard 
playback menu. (P67)
Press [
] to display the [PLAY] mode 
menu and select the item to set. (P74)
Usually, it is not necessary to format the 
built-in memory and the card. 
Format them when the message 
[BUILT-IN MEMORY ERROR] or 
[MEMORY CARD ERROR] appears.
Press 
3 to select [YES] and then 
press [MENU/SET].
(The illustration shows the screen when 
the built-in memory is formatted.)
• When a card is not inserted, you can 
format the built-in memory. When a card 
is inserted, you can format the card.
• If you press [MENU/SET] while 
formatting the built-in memory, the 
formatting will stop halfway. (However, 
all the pictures will be deleted.)
• Formatting irretrievably deletes all the 
data including clipboard pictures and 
protected pictures. Check the data 
carefully before formatting.
• If the card has been formatted on a PC or 
other equipment, format it on the camera 
again.
• Use a battery with sufficient battery power 
or the AC adaptor (DMW-AC5PP; 
optional) when formatting.
• Do not turn the camera off during 
formatting.
• It may take longer to format the built-in 
memory than the card. (Max. about 15 sec.)
• You cannot format an SD Memory Card or 
an SDHC Memory Card when the card’s 
Write- Protect switch 
A is set to [LOCK].
• If the built-in memory or the card cannot 
be formatted, consult your nearest 
Service Center.
[FORMAT]
Initializing the built-in memory or a 
card
/SET
MENU
/SET
MENU
2
For USA assistance, please call: 1-800-272-7033 
or send e-mail to : digitalstillcam@us.panasonic.com
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or  
send e-mail to: lumixconcierge@ca.panasonic.com
DMC-FX33_ENG.book  90 ページ  2007年7月9日 月曜日 午後12時58分