Panasonic DMC-FX33 ユーザーズマニュアル

93

VQT1J82

• When there are many pictures on the 

built-in memory or the card, it may take 
some time to transfer them.

• You may not be able to play back motion 

pictures on the built-in memory or the card 
correctly when the camera is connected to 
a PC. Import the motion picture files to the 
PC and then play them back.

• If battery power is exhausted while the 

camera and the PC are communicating, the 
recorded data may be damaged. When you 
connect the camera to the PC, use a battery 
with sufficient battery power or the AC 
adaptor (DMW-AC5PP; optional).

• If the remaining battery power becomes 

low while the camera and the PC are 
communicating, the status indicator blinks 
and the alarm beeps. In this case, stop 
the communication at once on the PC.

• When connecting the camera to a 

• Pictures edited or rotated with a PC may 

be displayed in black in playback mode, 
multi playback and calendar playback.

• Read the operating instructions for the PC.
• If a card is not inserted when the camera 

is connected to the PC, you can access 
the picture on the built-in memory. If a 
card is inserted, you can access the 
picture data on it. (If the camera is 
connected in clipboard mode, the built-in 
memory data is displayed even if a card is 
inserted.)

• You cannot switch between the built-in 

memory and the card while the camera is 
connected to the PC. When you want to 
switch between the built-in memory and 
the card, disconnect the USB connection 
cable, insert (or remove) the card and 
then connect the USB connection cable to 
the PC again.

• The message [PLEASE RE-CONNECT 

THE PRINTER.] appears if you change 
the mode dial to print mode [

] while 

this unit is connected to a PC. If 
connecting the printer again, change the 
mode to a mode other than [

] and then 

check that no data is being transferred. 
[ACCESS] appears on the LCD monitor of 
this unit while data is being transferred.)

DMC-FX33_ENG.book  93 ページ  ２００７年７月９日　月曜日　午後１２時５８分