Dataram 16GB DDR3-1600 DRIHS23/16GB プリント
製品コード
DRIHS23/16GB
DRIHS23
DDR3-1600, PC3-12800, Registered, ECC, 1.5V, 240-pin VLP DIMMs
DRIHS23
17-apr-12
Copyright
2012 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.
Products in Family
DRIHS23S/4GB (1 x 4GB 1R VLP DIMM)
DRIHS23/4GB (1 x 4GB 2R VLP DIMM)
DRIHS23/8GB (1 x 8GB 2R VLP DIMM)
DRIHS23/4GB (1 x 4GB 2R VLP DIMM)
DRIHS23/8GB (1 x 8GB 2R VLP DIMM)
Features
Description
240-pin JEDEC-compliant Very Low Profile (VLP) DIMMs
133.35 mm wide by 18.7 mm high (.738
133.35 mm wide by 18.7 mm high (.738
” x 5.25”)
Data Transfer Rate: up to 12.8 Gigabytes/sec
Operating Voltage: 1.5 V ±0.075
Error Checking and Correction (ECC) bits
Supports Intel SDDC and Chipkill Advanced ECC Features
Fully RoHS Compliant
Operating Voltage: 1.5 V ±0.075
Error Checking and Correction (ECC) bits
Supports Intel SDDC and Chipkill Advanced ECC Features
Fully RoHS Compliant
Each DRIHS23 upgrade consists of a matched pair of
DDR3 Registered VLP DIMMs with address/command
parity functionality. One 2K-bit EEPROM is used for
Serial Presence Detect and a combination register/PLL
with Address and Command Parity is also used. A
thermal sensor accurately monitors the DIMM module
and can prevent exceeding the maximum operating
temperature of 95C.
DDR3 Registered VLP DIMMs with address/command
parity functionality. One 2K-bit EEPROM is used for
Serial Presence Detect and a combination register/PLL
with Address and Command Parity is also used. A
thermal sensor accurately monitors the DIMM module
and can prevent exceeding the maximum operating
temperature of 95C.
Dataram Product
IBM Product
Supported in these IBM systems:
DRIHS23S/4GB
DRIHS23/4GB
DRIHS23/8GB
DRIHS23/4GB
DRIHS23/8GB
90Y3147
90Y3148
90Y3149
90Y3148
90Y3149
BladeCenter HS23 (7875)
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
.13 (.005).
All dimensions are expressed
in millimeters.
in millimeters.