Fortinet FortiAP-112B FAP-112B-C データシート
製品コード
FAP-112B-C
Differentiating Feature
Benefit
Enterprise Unified Threat Management
Protects your network with the widest range of security and networking technologies seamlessly
integrated into a single device: Firewall, IPS, Application Control, VPN, Web Filtering, and many others.
integrated into a single device: Firewall, IPS, Application Control, VPN, Web Filtering, and many others.
Application-Layer Quality of Service
Going above and beyond Wireless Multimedia Extensions (WME) by offering layer 7 traffic shaping and
application use control.
application use control.
Robust rogue AP control
Industry’s most comprehensive monitoring, detection and suppression of rogue APs for PCI DSS
compliance.
compliance.
‘Single Pane of Glass’ Management
Console
Console
Unmatched visibility and control of all wired and wireless network traffic that eliminates blindspots in your
security infrastructure and ensures consistent and effective policy enforcement and compliance.
security infrastructure and ensures consistent and effective policy enforcement and compliance.
One Access Point, Many Uses
Software reconfiguration allows one radio to be dedicated to wireless air monitoring while the other
provides full AP functionality to client; software license allows simultaneous mesh backhaul and remote AP
functionality.
provides full AP functionality to client; software license allows simultaneous mesh backhaul and remote AP
functionality.
TX Beam Forming (TxBF) and Maximal
Ratio Combining (MRC)
Ratio Combining (MRC)
Leads to wider coverage and optimum performance due to extended Rate over a longer range.
Technical Specifications
FortiAP-112B
Hardware Specifications
Indoor/Outdoor Deployment
Indoor or outdoor IP55 rated
Number of Radios
1
Number of Antennas
1 internal
Peak Antenna Gain
6dBi
Frequency Bands (GHz)*
2.400 - 2.4835
Frequency of Radio 1
2.4GHz IEEE b/g/n
Tx/Rx Streams
(802.11n mode)
1x1 MIMO with 1 spatial stream
65 Mbps association rate
Ethernet Port
2 x 10/100
Serial Console Port
No
Power over Ethernet (PoE)
15.4W
WME Multimedia Extensions
Yes (4 priority queues for voice, video, data and background traffic)
Simultaneous SSIDs
8 (7 for client access, 1 for monitoring)
EAP Type(s)
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-
GTC EAP-SIM, EAP-AKA, EAP-FAST
User/Device Authentication
WPA™ and WPA2™ with 802.1x or Preshared key, WEP and Web Captive
Portal, MAC blacklist & whitelist
Maximum Tx Power
24 dBm (250mW) *
Mean Time Between Failures
IEEE Specifications
IEEE Specifications
802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11n, 802.1X
Dimensions
Length x Width x Height
7.3 in (18.5 cm) x 2.6 in (6.6 cm) x 1.3 in (3.3 cm)
Access Point Weight
9.5 oz (270 g)
Package (shipping) Weight
16.8 oz (476 g)
Mounting Options
Wall mount and Pole mount options, drywall anchors supplied
Environment
Power Adapter
Power adapter and PoE injector included
Humidity
10% to 90% non condensing
Operating Temperature
-4 – 140 ˚F (-20 – 60 ˚C)
Storage Temperature
-4 – 158 ˚F (-20 – 70 ˚C)`
Target Application
Economical Outdoor point to point bridging and guest wireless
Directives
Low Voltage Directive • RoHS
* Frequency selection and power may be restricted to abide by regional regulatory compliance laws.