Philips Digital Terrestrial Receiver DTR230 DTR230/05 ユーザーズマニュアル
製品コード
DTR230/05
14
Operation
Automatic search
The next window is displayed:
The next window is displayed:
Note
The displayed values for the start and stop
frequency can normally be maintained.
frequency can normally be maintained.
7
Make use of the arrow keys orto
modify the start and end frequency values, if
desired.
8
By means of the arrow keys
oryou
determine the channels to be searched for:
All channels, or channels that are Free-to-
air only.
9
Then highlight the OK field by using the
arrow key
arrow key
or
next to Start scan
mode, and press the OK key.
The scan mode is started. The screen dialog
thereby provides information on the progress of
the channel search.
thereby provides information on the progress of
the channel search.
Note
By pressing the EXIT key you can stop the scan
mode at any time.
During receiver set-up and channel scanning, the
signal strength will indicate your antenna
reception. If you reach at least 50% Signal
Strength, then your antenna and receiver are
properly connected. If it remains under the 10%
gauge, then you need to first check the cable
connection. If the "Quality" gauge reaches at
least 50%, then you can be sure that you are
indeed receiving digital broadcast signals.
If your reception is not optimal (few channels or
"blocky" image), your antenna installation should
be checked by a professional as it may need to be
redirected or fixed.
mode at any time.
During receiver set-up and channel scanning, the
signal strength will indicate your antenna
reception. If you reach at least 50% Signal
Strength, then your antenna and receiver are
properly connected. If it remains under the 10%
gauge, then you need to first check the cable
connection. If the "Quality" gauge reaches at
least 50%, then you can be sure that you are
indeed receiving digital broadcast signals.
If your reception is not optimal (few channels or
"blocky" image), your antenna installation should
be checked by a professional as it may need to be
redirected or fixed.
Terrestrial service coverage
Digital terrestrial broadcasting is progressing
throughout Europe. Please note that the
reception of digital signals may need to be
verified as it can be aversely affected by physical
elements, such as mountainous areas, high
buildings, etc. When analogue broadcasting in
your region is switched off, there should be a
quality improvement for all digital broadcasting.
As analogue switch off occurs, the number of
digital channels available in each region may also
be affected. Please check what is available in your
area on the relevant website:
Digital terrestrial broadcasting is progressing
throughout Europe. Please note that the
reception of digital signals may need to be
verified as it can be aversely affected by physical
elements, such as mountainous areas, high
buildings, etc. When analogue broadcasting in
your region is switched off, there should be a
quality improvement for all digital broadcasting.
As analogue switch off occurs, the number of
digital channels available in each region may also
be affected. Please check what is available in your
area on the relevant website:
-
www.digitaluk.co.uk
(UK)
-
www.tnt-gratuite.fr
(France)
-
www.tdt.es
(España)
-
www.ueberallfernsehen.de
(Deutschland)
-
www.dtgvi.com
(Italia)
-
www.digi-tv.dk
(Denmark)
-
www.digitv.fi
(Finland)
-
www.teracom.se
(Sweden)
-
www.digitalinfo.cz
(Czech Republic)
DSR220co.book Page 14 Lundi, 18. janvier 2010 6:23 18