ABUS FU8211 プリント
Secvest 2WAY Wireless Universal Module
Art. no. FU8211
• NEW: Supports perimeter warnings, e.g. when outside motion detectors are used
• Versatile module for use in every alarm system
• Converts wired systems into hybrid alarm systems (allowing them to be operated with wireless detectors)
• Repeating by bi-directional 2WAY components (increases the wireless range)
• For Secvest generation wireless sensors
• Allows the implementation of 6 different functions
• Versatile module for use in every alarm system
• Converts wired systems into hybrid alarm systems (allowing them to be operated with wireless detectors)
• Repeating by bi-directional 2WAY components (increases the wireless range)
• For Secvest generation wireless sensors
• Allows the implementation of 6 different functions
The Secvest 2WAY wireless accessory module is an optional accessory for your Secvest. The wireless accessory
module (WAM) can also be integrated into wired systems, such as the Terxon SX and Terxon MX, allowing
additional wireless components to be used in wired alarm systems. The module features 6 main functions:
Repeater module (doubles the range): The WAM forwards signals from up to 8 sensors to the alarm panel. This
virtually doubles the wireless transmission range.Output modules (e.g. home automation): Up to 4 outputs
(switching capacity 500 mA) in the WAM are activated for programmed events.Transmission/reception module: In
addition to the 4 outputs, the alarm inputs on the WAM (1 x alarm, 1 x sabotage) are put to use.Sounder module:
The WAM can be used to connect an external sounder (siren & flashing light) to the Secvest (a wired siren
will then also respond to wireless signals).Siren transmitter/receiver: The WAM can be used to integrate a wireless
siren into a wired alarm system.Reception module: Using a WAM, 8 wireless components can be integrated into
any wired system. The WAM receives the signals from the wireless detector, and activates the alarm system. This
allows the Secvest detectors to be integrated into the Terxon alarm control panel.The WAM is powered by a 12 V
power supply unit.
module (WAM) can also be integrated into wired systems, such as the Terxon SX and Terxon MX, allowing
additional wireless components to be used in wired alarm systems. The module features 6 main functions:
Repeater module (doubles the range): The WAM forwards signals from up to 8 sensors to the alarm panel. This
virtually doubles the wireless transmission range.Output modules (e.g. home automation): Up to 4 outputs
(switching capacity 500 mA) in the WAM are activated for programmed events.Transmission/reception module: In
addition to the 4 outputs, the alarm inputs on the WAM (1 x alarm, 1 x sabotage) are put to use.Sounder module:
The WAM can be used to connect an external sounder (siren & flashing light) to the Secvest (a wired siren
will then also respond to wireless signals).Siren transmitter/receiver: The WAM can be used to integrate a wireless
siren into a wired alarm system.Reception module: Using a WAM, 8 wireless components can be integrated into
any wired system. The WAM receives the signals from the wireless detector, and activates the alarm system. This
allows the Secvest detectors to be integrated into the Terxon alarm control panel.The WAM is powered by a 12 V
power supply unit.
Page 1 of 2
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 03/2014