Da-Lite Advantage Electrol, 120" 92614L プリント
製品コード
92614L
F R O N T P R O J E C T I O N S C R E E N S
10
www.da-lite.com • info@da-lite.com
ADVANTAGE
®
ELECTROL
®
• Designed and developed with the installer and the
installation process in mind.
• You can choose to receive the case and fabric together
or have them sent separately to ensure that the screen
surface is not damaged during the “rough-in” stages of
construction.
• UL Plenum rated case.
installation process in mind.
• You can choose to receive the case and fabric together
or have them sent separately to ensure that the screen
surface is not damaged during the “rough-in” stages of
construction.
• UL Plenum rated case.
Concealed without Doors Electric
Projection Screen
When ordering, make appropriate
selections:
1.
Select size from charts at the
lower right.
2.
Select viewing surface:
• Matte White
• High Contrast Matte White
• Video Spectra 1.5
• High Power
®
GREENGUARD
®
and
GREENGUARD
®
Children and
Schools Certified.
3.
Options:
• Extra Drop available to lower
picture area more than normal.
Specify total drop at top _____
(black or white) or at bottom
_____ (black or white). 13'
maximum total surface height
including picture area.
• Single Motor Low Voltage Control
(LVC) - external.
• Single Motor Low Voltage Control
(LVC) - built-in.
• Wireless Remote Control for LVC.
• Radio Frequency Remote.
• Radio Frequency Range
Extender available
• Infrared Remote.
• Silent Motor.
• Silent Motor with Integrated LVC.
• Key Locking Cover Plate for 120V
or LVC Switch.
• Key Operated Switch for 120V
only (NOTE: Cannot be used with
LVC).
• No Borders (Black masking
borders standard).
• 220 Volt (50 Hz) Motor.
• Video Projector Interface Control
- external.
• Video Projector Interface Control
- built-in (Adds 10" to case length
on 220V motor only)
• SCB-100 RS-232 Serial Control
Board - external.
• NET-100 Ethernet-Serial
Adapter
• SCB-100 RS-232 Serial Control
Board - built-in. (adds 10" to
overall length of case)
• NET-100 Ethernet-Serial
Adapter
• SCB-200 RS-232 Serial Control
Board - built-in only. (adds 10" to
overall length of case)
• NET-200 Ethernet-Serial
Adapter
• WC-200 Wall Controller
• IR-200 Infrared Remote
SUGGESTED SPECIFICATIONS:
_______________projection screen(s),____________(H) x _________(W),
electrically operated 120 volt (60Hz), not more than 2.4 amp with a
quick connect male plug-in connector on the motor. Shall have specially
designed motor mounted inside the roller, to be three wire with ground,
quick reversal type, oiled for life, with automatic thermal overload cutout,
integral gears, capacitor and an electric brake to prevent coasting. To
have preset but adjustable limit switches to automatically stop picture
surface in the “up” and “down” positions. Junction box shall be externally
integrated into the housing making it possible to install the housing and
wire to the building’s electrical system during construction. The junction
box shall contain a quick connect connector that is mounted in the housing
for easy plug-in connection to the motorized fabric and roller assembly.
The roller to be of rigid metal. The motorized fabric and roller assembly
to be installed in the case at the factory or at a later time at the job site.
Roller mounting brackets to be adjustable to allow centering or offsetting
of the screen within the case. Screen to be designed for left or right-hand
motor installation. Screen fabric to be flame retardant and mildew resistant
fiberglass with black masking borders standard. Bottom of fabric shall be
formed into a pocket holding a metal rod. Heavy duty plastic caps shall
protect the ends of the rod. Top, front and back of case to be made of
extruded aluminum powder coated white. End caps to be of heavy gauge
steel, powder coated white. Bottom of case to have a removable access
door. Door to be of extruded aluminum powder coated white. Bottom of
case to be self-trimming, with a built-in flange around the bottom of the
case. To be complete with a three-position control switch and cover plate.
Suitable for use in environmental air space in accordance with section
300-22 (c) of the National Electric Code, and sections 2-128, 12-010 (3)
and 12-100 of the Canadian Electrical Code, part 1, CSA C22.1. Screen to
be listed by Underwriters’ Laboratories.
electrically operated 120 volt (60Hz), not more than 2.4 amp with a
quick connect male plug-in connector on the motor. Shall have specially
designed motor mounted inside the roller, to be three wire with ground,
quick reversal type, oiled for life, with automatic thermal overload cutout,
integral gears, capacitor and an electric brake to prevent coasting. To
have preset but adjustable limit switches to automatically stop picture
surface in the “up” and “down” positions. Junction box shall be externally
integrated into the housing making it possible to install the housing and
wire to the building’s electrical system during construction. The junction
box shall contain a quick connect connector that is mounted in the housing
for easy plug-in connection to the motorized fabric and roller assembly.
The roller to be of rigid metal. The motorized fabric and roller assembly
to be installed in the case at the factory or at a later time at the job site.
Roller mounting brackets to be adjustable to allow centering or offsetting
of the screen within the case. Screen to be designed for left or right-hand
motor installation. Screen fabric to be flame retardant and mildew resistant
fiberglass with black masking borders standard. Bottom of fabric shall be
formed into a pocket holding a metal rod. Heavy duty plastic caps shall
protect the ends of the rod. Top, front and back of case to be made of
extruded aluminum powder coated white. End caps to be of heavy gauge
steel, powder coated white. Bottom of case to have a removable access
door. Door to be of extruded aluminum powder coated white. Bottom of
case to be self-trimming, with a built-in flange around the bottom of the
case. To be complete with a three-position control switch and cover plate.
Suitable for use in environmental air space in accordance with section
300-22 (c) of the National Electric Code, and sections 2-128, 12-010 (3)
and 12-100 of the Canadian Electrical Code, part 1, CSA C22.1. Screen to
be listed by Underwriters’ Laboratories.
Matte White: Seamless in all sizes.
High Contrast Matte White: Available in sizes where both dimensions do not
exceed 10'.
Video Spectra 1.5: Available in sizes where both dimensions do not exceed 8'.
High Power
High Contrast Matte White: Available in sizes where both dimensions do not
exceed 10'.
Video Spectra 1.5: Available in sizes where both dimensions do not exceed 8'.
High Power
®
: Available in sizes up to 9' x 12'. Horizontal seam required when both
dimensions exceed 6'.
Detailed dimensional drawings, wiring diagrams and installation instructions
available upon request. Specifications subject to change without notice.
available upon request. Specifications subject to change without notice.
Viewing
Nominal
Overall
Approx.
Area
Diagonal
Case
Shipping
H x W
Length
Wt. Lbs.
45" x 80"
92"
89
1/2"
75
52" x 92"
106"
101
1/2"
88
54" x 96"
110"
105
1/2"
89
58" x 104"
119"
113
1/2"
95
65" x 116"
133"
125
1/2"
98
78" x 139"
159"
149
1/2"
104
90" x 160"
184"
169
1/2"
123
16:9 HDTV FORMAT DIMENSIONS (2" standard black drop at top)
Viewing
Nominal
Overall
Approx.
Area
Diagonal
Case
Shipping
H x W
Length
Wt. Lbs.
43" x 57"
72"
65
1/2"
60
50" x 67"
84"
75
1/2"
65
57" x 77"
96"
89
1/2"
77
60" x 80"
100"
89
1/2"
77
69" x 92"
120"
101
1/2"
89
87" x 116"
150"
125
1/2"
100
105" x 140"
180"
149
1/2"
106
120" x 160"
200"
169
1/2"
123
4:3 VIDEO FORMAT DIMENSIONS (2" standard black drop at top)
Sizes
Overall
Approx.
H x W
Case
Shipping
Length
Wt. Lbs.
50" x 50"
55
1/2"
54
60" x 60"
65
1/2"
61
70" x 70"
75
1/2"
68
84" x 84"
89
1/2"
79
6' x 8'^
101
1/2"
89
8' x 8'
101
1/2"
91
7' x 9'^
113
1/2"
96
9' x 9'^
113
1/2"
97
8' x 10'^
125
1/2"
100
10' x 10'^
125
1/2"
102
9' x 12'^
149
1/2"
106
12' x 12'
149
1/2"
119
SQUARE FORMAT DIMENSIONS
(screens with ^ have 2" standard black drop at top)
(screens with ^ have 2" standard black drop at top)
Overall case length dimensions ±
1/4
".
Note: Custom formats and sizes available upon request.
Note: Add 10" to overall case length for built-in SCB-100
or SCB-200.
Electrical junction box extends 2
Note: Add 10" to overall case length for built-in SCB-100
or SCB-200.
Electrical junction box extends 2
1/8
" past case length on left end of
case (1
1/8
" past ceiling flange). Internal junction box available (will
add 3
1/2
" to overall case length and must be specified at time of
order).
Electrical
Junction Box
Motor End
Variable Position
Mounting Bracket
Audience
Side
6-1/16"
3/8" Threaded Rod
(not supplied) attached
to Hanger Bracket
Self-Trimminng
Flange
6-3/8"
7-3/4"
Finished Ceiling
8"
Viewing
Nominal
Overall
Approx.
Area
Diagonal
Case
Shipping
H x W
Length
Wt. Lbs.
50" x 80"
94"
89
1/2"
75
60" x 96"
113"
105
1/2"
89
69" x 110"
130"
119
1/2"
97
87" x 139"
164"
149
1/2"
104
16:10 WIDE FORMAT DIMENSIONS (2" standard black drop at top)
6-1/16"
7-3/4"
6-7/16"