JVC LT-26DX7 ユーザーズマニュアル

48

49



We may change the design and specifications without notice.

Main unit

Terminals / Connectors

Input / Output 

terminals

EXT-1

Euroconnector x 1

(SCART connector)

Composite video, S-video, 

Analogue RGB, AUDIO L / R

TV out

EXT-2

Euroconnector x 1

(SCART connector)

Composite video, S-video, 

Analogue RGB, AUDIO L / R

Dubbing out

(S-VIDEO out is 

available only for DTV 

channels)

Input terminals

EXT-3

RCA connectors x 3,  

S-VIDEO connector x 1

Composite video, S-video

AUDIO L / R

EXT-4

RCA connectors x 5

Analogue component  

(576i (625i) / 480i (525i),  

Progressive : 576p (625p) / 480p (525p),  

HD : 1080i (1125i), 720p (750p))

AUDIO L / R

EXT-5 (HDMI-1)

HDMI connector x 1

HDMI  

(576i (625i) / 480i (525i) /  

576p (625p) / 480p (525p),  

1080i (1125i), 720p (750p))

EXT-6 (HDMI-2)
PC INPUT

D-SUB (15 pins) x 1 Analogue PC signal (P. 48)

Output 

terminals

AUDIO OUT

RCA connectors x 2

Audio L / R

Headphone

Stereo mini-jack x 1 

(3.5 mm in diameter)

Headphone  

output

“T-V LINK” allows the TV to share information easily with a connected “T-V LINK” compatible device.

By using T-V LINK :



You can send the ATV channel information programmed on the TV to the “T-V LINK” compatible device, so that 

both the TV and the external device have the same channel settings. When connecting a new external device, 

channel information is loaded into it, allowing channel setup to be completed very quickly. For more details, refer 

to the external device’s manual.



You can easily record the TV programme you are viewing on a “T-V LINK” compatible device by using the 

“DIRECT REC” feature. For more details, refer to the external device’s manual.



After timer-record setting, the TV will instruct the recorder to start and stop recording, via DIRECT REC.

*Macintosh* computers are not supported. 

(Macintosh is a registered trademark of  

Apple Computer, Inc.)



If the signal doesn’t appear, check that the vertical 

frequency on the PC is set to “60Hz”.

Some cable companies transmit a signal called “ACI” which contains information that allows TV channels to be 

registered automatically on your TV.

When an ACI signal is received, “ACI Start / ACI Skip” appears in the “Auto Program” screen.

Connect a “DVI“ device to “EXT-5 (HDMI)” using “DVI-HDMI” conversion cable. Connect analogue sound output of 

the DVI device to L and R terminals in EXT-4.



Set “Audio” in “HDMI Setting” to “Analogue” or “Auto” 



 (P. 35)



EXT-6 input does not support DVI devices.



EXT-6 input does not support analogue sound (EXT-4).

Resolution

640 x 480 (VGA) 1024 x 768 (XGA)

Vertical frequency (Hz)

60.0

60.0

What is “T-V LINK”?

What is “ACI” (Automatic Channel Installation)?

PC Signals that can be displayed

Connect “DVI” devices

Fuse

Attach a new plug following the steps below. If in doubt, contact your local retailer.



Never connect to the larger terminal marked with an “E”, the safety earth  

symbol “ ” or coloured green or green-and-yellow.



The wires in the mains lead on this product are coloured with the following code:

· Blue: Neutral wire (connect to the black terminal, or one marked “N”)

· Brown: Live wire (connect to the red terminal, or one marked “L”)

Open the plug as illustrated on the right.



When replacing the fuse, always use a correctly rated and approved type and 

re-fit the fuse cover when finished.

If in doubt, contact your local retailer.

If you accidentally cut the power cord

Change the fuse in the plug

Important



This TV has the CAM (Conditional Access Module) slot for watching pay-per-view.

Please note that the CAM and viewing card must be purchased separately.

Broadcasting systems

CCIR, I

Colour systems

PAL

· The EXT terminals also support the NTSC 3.58/4.43 MHz system.

Channels and frequencies



Analogue : 

E21-E69 (UNITED KINGDOM) 

IR A-J, E2-E12, E21-E69 (IRELAND) 



Digital : 474 MHz-850MHz (channel 21-68)

Sound-multiplex systems

NICAM (I) system.

Teletext systems

Analogue : FLOF (Fastext), WST (World Standard System).

Digital : MHEG 5 UK profile

Power requirements

AC 220 V - 240 V, 50/60Hz

Audio output (Rated power output) 10 W + 10 W
Speakers

6.6 cm round x 4

5.0 cm round x 2

Power consumption

[standby]

227 W

[0.5 W]

134 W

[0.6 W]

120 W

[0.6 W]

Screen size 

(visible area size measured diagonally) 101 cm

80 cm

66 cm

Dimensions (W x H x D: mm)

[without stand]

1000 x 720.5 x 293

[1000 x 670.5 x 117.3]

800 x 591.9 x 244.4

[800 x 545 x 133.5]

672 x 517.9 x 244.4

[672 x 471 x 133.5]

Weights

[without stand]

29.3 kg

[24.5 kg]

17.9 kg

[16.3 kg]

14.7 kg

[13.1 kg]

Accessories

(See “Check accessories”, P. 7)

   48-49

2/20/2006   11:21:32 AM