HP DL560 G8 686785-001 ユーザーズマニュアル
製品コード
686785-001
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Factory Integrated Models must start with a CTO Server.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Factory Integrated Models must start with a CTO Server.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
Step 1: Base Configuration (choose one of the following configurable models)
HP Models
HP ProLiant DL560 Gen8 Configure-to-order Server
686792-B21
Factory Integrated Models ship with:
4 x HP Smart Socket Guides for fast processor installation.
48 DIMM slots for RDIMM and LRDIMM Memory installation
1 FlexibleLOM connector: (see Step2: HP Flexible NIC section below for NIC choices to
populate the embedded connector)
Smart Array P420i Controller w/ Zero Memory (ZM)
I/O slots - 3 Slots come standard:
48 DIMM slots for RDIMM and LRDIMM Memory installation
1 FlexibleLOM connector: (see Step2: HP Flexible NIC section below for NIC choices to
populate the embedded connector)
Smart Array P420i Controller w/ Zero Memory (ZM)
I/O slots - 3 Slots come standard:
Slot 1 - FL/FH x16 PCIe 3.0 (x16 connector)
Slot 2 - HL/FH x8 PCIe 3.0 (x8 connector)
Slot 3 - HL/FH x4 PCIe 2.0 (x8 connector)
Additional Slots may be added via selections from the PCI Information and
Options subsection
Slot 2 - HL/FH x8 PCIe 3.0 (x8 connector)
Slot 3 - HL/FH x4 PCIe 2.0 (x8 connector)
Additional Slots may be added via selections from the PCI Information and
Options subsection
(1) HP 1200W CS Platinum Plus Hot Plug Power Supply (94% Efficient)
System Fans - 6 (N + 1 redundancy standard)
Drive Cage - 5SFF (Optical media drive optional)
USB - 4 Rear, 2 Front, 1 Internal, 1 Micro SD slot
HP iLO Management Engine (standard)
HP Ball Bearing Rail Kit and Cable Management Arm
System Fans - 6 (N + 1 redundancy standard)
Drive Cage - 5SFF (Optical media drive optional)
USB - 4 Rear, 2 Front, 1 Internal, 1 Micro SD slot
HP iLO Management Engine (standard)
HP Ball Bearing Rail Kit and Cable Management Arm
NOTE: Gen8 rail kits have changed significantly from prior generation rail kits. Please
take a moment to review the installation documentation that comes with the server to
help you with the installation of your Gen8 server.
CAUTION: HP recommends that at least two people are used for all rack server
installations. Please refer to your installation instructions for proper tools and number
of people to use for any installation
take a moment to review the installation documentation that comes with the server to
help you with the installation of your Gen8 server.
CAUTION: HP recommends that at least two people are used for all rack server
installations. Please refer to your installation instructions for proper tools and number
of people to use for any installation
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
noted)
HP Processors
NOTE: All processors within the server must be identical.
NOTE: All processor kits contain one processor. If two processors are desired, select
one xxxxxx-L21 and one xxxxxx-B21. If four processors are desired, select one xxxxxx-
L21 and three xxxxxx-B21. 3P configurations are not supported.
NOTE: All processor kits contain one processor. If two processors are desired, select
one xxxxxx-L21 and one xxxxxx-B21. If four processors are desired, select one xxxxxx-
L21 and three xxxxxx-B21. 3P configurations are not supported.
Eight-Core Processors
HP DL560 Gen8 Intel® Xeon® E5-4650 (2.7GHz/8-core/20MB/130W) FIO Processor Kit
686843-L21
HP DL560 Gen8 Intel® Xeon® E5-4650L (2.6GHz/8-core/20MB/115W) FIO Processor Kit
686832-L21
QuickSpecs
HP ProLiant DL560 Generation8 (Gen8)
Configuration Information - Factory Integrated Models
DA - 14395 North America — Version 8 — December 10, 2012
Page 21