Triton Free-standing cabinet RMA 800x1000 left glass door RMA-42-A81-BAX-A1-MAA ユーザーズマニュアル
製品コード
RMA-42-A81-BAX-A1-MAA
15
15
DOOR FOR FAN UNITS
With this cabinet type, it is possible to order
a special metal door with a preparation
for mounting of RAx-CH-X0x-X3 fan units.
Further informations are available in section
Active cooling.
a special metal door with a preparation
for mounting of RAx-CH-X0x-X3 fan units.
Further informations are available in section
Active cooling.
BREAK-OUT BLANKING PANELS
Entry openings for cables in the rear part of
the cabinet are covered with breakout-type
blanking panels. It is possible to use a blan-
king panel with a brush in cable opening to
avoid dust penetration. The plastic frame
serves to protect cables from damage (both
are parts of the cabinet supply).
the cabinet are covered with breakout-type
blanking panels. It is possible to use a blan-
king panel with a brush in cable opening to
avoid dust penetration. The plastic frame
serves to protect cables from damage (both
are parts of the cabinet supply).
DETAIL OF FIXTURE OF THE
CABINET REMOVABLE REAR COVER
CABINET REMOVABLE REAR COVER
DETAIL OF THE REMOVABLE SIDE
PANEL LOCK
PANEL LOCK
THE BACK SIDE OF THE CABINET
On the rear cover of the cabinet are two cable openings covered
with breakout panels. One is at the top and one at the bottom of the rear
cover. Other cable entries are on the ceiling and the base of the cabinet.
with breakout panels. One is at the top and one at the bottom of the rear
cover. Other cable entries are on the ceiling and the base of the cabinet.
RMA
CASTORS, NIVELATION FEET
Preparation for mounting of castors
and nivelation feet.
and nivelation feet.
OPENING FOR A FAN UNIT
A large opening covered with a breakout-
type blanking panel enables mounting and
removal of the Triton fan unit from outside of
the cabinet without a need of using screws.
type blanking panel enables mounting and
removal of the Triton fan unit from outside of
the cabinet without a need of using screws.