Panasonic PT-DZ680ULS ユーザーズマニュアル
90 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
[NETWORK] menu
Select [NETWORK] from the main menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” (x page 49) for the operation of the menu screen.
Refer to “Navigating through the menu” (x page 49) for the operation of the menu screen.
r
f
After selecting the item, press asqw to set.
[NETWORK SETUP]
Perform the initial setting of the network before using the network function.
1)
Press as to select [NETWORK SETUP].
2)
Press the <ENTER> button.
r
f
The
[NETWORK SETUP] screen is displayed.
3)
Press as to select an item, and change
the settings according to the operation
instructions of the menu.
4)
Press as to select [STORE], and press the
<ENTER> button.
5)
When the confirmation is displayed, select [OK]
or [CANCEL], and press the <ENTER> button.
r
r
[NETWORK SETUP]
[PROJECTOR NAME]
Change the setting when using a DHCP server.
[DHCP]
Set the item to [ON] when using a DHCP server to automatically acquire the IP address. Set to [OFF] when
not using a DHCP server.
[IP ADDRESS]
Enter the IP address when not using a DHCP server.
[SUBNET MASK]
Enter the subnet mask when not using a DHCP server.
[DEFAULT GATEWAY]
Enter the default gateway address when not using a DHCP server.
[STORE]
Save the current network settings.
Note
r
f
When using a DHCP server, confirm that the DHCP server is running.
r
f
Consult your network administrator regarding the IP address, subnet mask, and default gateway.
[NETWORK CONTROL]
Set up the control method of the network.
1)
Press as to select [NETWORK CONTROL].
2)
Press the <ENTER> button.
r
f
The
[NETWORK CONTROL] screen is displayed.
3)
Press as to select an item, then press qw to
change the setting.
4)
Press as to select [STORE], and press the
<ENTER> button.
5)
When the confirmation is displayed, select [OK]
or [CANCEL], and press the <ENTER> button.