Juniper 1-Port Gigabit Ethernet 10/100/1000 Copper Enhanced PIM JXE-1GE-TX-S データシート
製品コード
JXE-1GE-TX-S
Datasheet
Juniper Networks Ethernet
Enhanced Physical Interface
Modules (EPIMs)
The EPIMs leverage a separate high speed bus that provides nonblocking access to each
of the cards to maximize performance.
of the cards to maximize performance.
Features
• The SSG 550 can support up to four EPIMs plus two PIMs (DS3, T1/E1, or Serial) while
the SSG 520 can support up to two EPIMs plus four PIMs.
• The J6350 can support up to four EPIMs plus two PIMs (DS3/E3, T1/E1, FE, ADSL2+,
G.SHDSL, ISDN, or Serial) while the J4350 can support up to two EPIMs plus four PIMs.
• Supports full VLAN ID range (1-4096) with the total configured being limited to the
maximum number of VLANs specified by the base systems.
• EPIM configuration can be accomplished through CLI, WebUI or NetScreen
Security-Manager.
the SSG 520 can support up to two EPIMs plus four PIMs.
• The J6350 can support up to four EPIMs plus two PIMs (DS3/E3, T1/E1, FE, ADSL2+,
G.SHDSL, ISDN, or Serial) while the J4350 can support up to two EPIMs plus four PIMs.
• Supports full VLAN ID range (1-4096) with the total configured being limited to the
maximum number of VLANs specified by the base systems.
• EPIM configuration can be accomplished through CLI, WebUI or NetScreen
Security-Manager.
Common Specifications
For environmental specifications and certifications, please see the SSG 500 Series and
J-series datasheets and the datasheets for the DS3/E3, T1/E1, Serial, FE, ADSL2+,
G.SHDSL, ISDN PIMs.
J-series datasheets and the datasheets for the DS3/E3, T1/E1, Serial, FE, ADSL2+,
G.SHDSL, ISDN PIMs.
Specifications
Product Number
Description
JXE-1GE-TX-S
1-Port Gigabit Ethernet 10/100/1000 Copper Enhanced PIM
JXE-4FE-TX-S
4-Port Fast Ethernet Enhanced PIM
JXE-1GE-SFP-S
1-Port Fiber Gigabit Ethernet Enhanced PIM, SFP sold separately
JX-SFP-1GE-LX
SFP 1000Base-LX Gigabit Optical Module for JXE-1GE-SFP-S
JX-SFP-1GE-SX
SFP 1000Base-SX Gigabit Optical Module for JXE-1GE-SFP-S
Specifications
Dimensions (H x W x D)
0.63 in. x 5.45 in. x 6.5 in.
1.6 cm. x 13.8 cm. x 16.5 cm.
1.6 cm. x 13.8 cm. x 16.5 cm.
10/100/1000 EPIM Specifications
1-port 10/100/1000 copper Ethernet
• Auto sensing for 10 Mbps, 100 Mbps and 1000 Mbps full duplex and
• Auto sensing for 10 Mbps, 100 Mbps and 1000 Mbps full duplex and
half duplex
• Auto correcting MDI/MDIX
• One RJ-45 connector
• Link and Activity LEDs
• One RJ-45 connector
• Link and Activity LEDs
4-Port 10/100 EPIM Specifications
• 4-port 10/100 copper Ethernet
• Auto sensing for 10 Mbps and 100 Mbps full duplex and half duplex
• Auto correcting MDI/MDIX
• 4 RJ-45 connectors
• Link and Activity LEDs
• Auto sensing for 10 Mbps and 100 Mbps full duplex and half duplex
• Auto correcting MDI/MDIX
• 4 RJ-45 connectors
• Link and Activity LEDs
1-Port Gigabit Ethernet SFP EPIM
Specifications
• LX and SX fiber SFP options (SFP not included)
• 1 SFP Cage
• Link and Activity LEDs
• 1 SFP Cage
• Link and Activity LEDs
The Juniper Enhanced Physical Interface
Modules (EPIMs) for Secure Services Gateway
(SSG) 500 Series platforms and J-series J4350
and J6350 routers are designed to complement
the four on-board 10/100/1000 Ethernet
interfaces with expanded Ethernet connectivity
options. Three EPIMs are available:
• 1-port 10/100/1000 copper Ethernet EPIM
• 1 Gigabit Ethernet Small Form-factor
Pluggable (SFP) EPIM for fiber connectivity
• 4-port 10/100 Ethernet EPIM