HP 701977-151 ユーザーズマニュアル
Card reader/USB 3.0 board
Description
Spare part number
Card reader/USB 3.0 board
689283-001
Before removing the card reader/USB 3.0 board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
5.
Remove the service access cover (see
6.
Remove the optical drive (see
).
7.
Remove the keyboard (see
8.
Remove the top cover (see
).
Remove the card reader/USB 3.0 board:
1.
Position the computer right-side up with the front toward you.
2.
Remove any plastic blanks in the card reader slots.
3.
Remove the 3 Phillips M2.5x3.0 screws (1) that secure the card reader/USB 3.0 board to the
base enclosure.
base enclosure.
4.
Lift the left side (2) of the card reader/USB 3.0 board to disconnect it from the system board.
Reverse this procedure to install the card reader/USB 3.0 board.
102 Chapter 4 Removal and replacement procedures