HP 701977-B31 ユーザーズマニュアル
Modem module cable
NOTE:
The modem module cable is included in the Cable Kit, spare part number 652545-001.
Before removing the modem module cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
5.
Remove the service access cover (see
6.
Remove the optical drive (see
).
7.
Remove the keyboard (see
8.
Remove the top cover (see
).
9.
Remove the Smart Card reader (see
10.
1.
).
2.
Remove the modem module (see
).
Remove the modem module cable:
1.
Position the computer right side-up with the front toward you.
2.
Remove the modem cable from the routing clips in the base enclosure.
3.
Loosen the Torx M2.0x3.0 screw from the side black trim piece (1).
4.
Gently pry the modem module cable out from the base enclosure (2), and then remove cable (3).
100 Chapter 4 Removal and replacement procedures