HP 701977-B31 ユーザーズマニュアル
3.
Flex the inside edges of the top edge (3), the left and right sides (4), and the bottom edge (5) of
the display bezel until the bezel disengages from the display enclosure and then remove the
bezel (6).
the display bezel until the bezel disengages from the display enclosure and then remove the
bezel (6).
Reverse this procedure to install the display bezel.
Display panel
Description
Spare part number
43.9 cm (17.3 in), HD+ AG LED WVA
691223-001
43.9 cm (17.3 in), FHD AG WVA
691224-001
Before removing the display panel, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
Remove the display assembly (see
).
5.
Remove the display bezel (see
Remove the display panel:
1.
Remove the 2 Torx screws on each hinge (1).
2.
Remove the two Phillips rawhead screws (2) on the upper left and right corners of the display
panel.
panel.
Component replacement procedures
79