Eaton TPC115-3245 カタログ
eaton.com/epdu 1.800.356.5794
47
Rack
s a
nd a
ir
flo
w ma
nag
eme
nt
eme
nt
Eaton Heat Containment System (HCS)
Eaton's HCS is a simple, scalable and low cost rack-based solution
to cool up to 25 kW or more per enclosure without the expense of
adding supplemental CRAC units to your data center. This patented
technology is available on Eaton’s Paramount and Vantage S2
enclosure systems and can also be field retrofitted to most
manufacturers' enclosures. The HCS contains and directs the heat
exhaust of your IT equipment through the chimney that is attached
to the top rear of the enclosure. The hot air is then ducted to your
existing CRAC units through a plenum ceiling or high air returns.
to cool up to 25 kW or more per enclosure without the expense of
adding supplemental CRAC units to your data center. This patented
technology is available on Eaton’s Paramount and Vantage S2
enclosure systems and can also be field retrofitted to most
manufacturers' enclosures. The HCS contains and directs the heat
exhaust of your IT equipment through the chimney that is attached
to the top rear of the enclosure. The hot air is then ducted to your
existing CRAC units through a plenum ceiling or high air returns.
Photo courtesy of Humana
Active Airflow Manager
Eaton’s HCS pressure based system with active airflow, when
combined with best practices, improves performance metrics
considerably. Allocating the correct amount of airflow at known
intake locations is the key to reducing energy consumption
while increasing equipment performance. Best practices such
as blanking panels, proper perforated tile placement and the
reduction of bypass airflow must be employed to ensure desired
results.
combined with best practices, improves performance metrics
considerably. Allocating the correct amount of airflow at known
intake locations is the key to reducing energy consumption
while increasing equipment performance. Best practices such
as blanking panels, proper perforated tile placement and the
reduction of bypass airflow must be employed to ensure desired
results.
HCS for third-party racks
Convert existing enclosures to the HCS to eliminate the
incremental capital expense associated with having to add more
CRAC units or other supplemental cooling.
incremental capital expense associated with having to add more
CRAC units or other supplemental cooling.
Visit powerquality.eaton.com to view Eaton’s entire portfolio
of racks, enclosures and airflow management solutions