WatchGuard Ethernet Power Injector WG8568 ユーザーズマニュアル
製品コード
WG8568
10
Pair the AP Device with the WatchGuard XTM
You must now use the WatchGuard XTM to pair the WatchGuard AP device with the XTM
and add the device to the wireless network.
and add the device to the wireless network.
1. Use Policy Manager or the Fireware XTM Web UI to edit the XTM device
configuration.
2. Select Network > Gateway Wireless Controller.
3. Enable the Gateway Wireless Controller, and save the configuration to the XTM
device.
4. In the Gateway Wireless Controller, on the Access Points tab, click Refresh to
discover the AP device.
5. Select the unpaired Access Point and click Pair.
6. In the Pairing Passphrase dialog box, type the passphrase on the AP device. The
default passphrase is wgwap.
For detailed information about WatchGuard AP pairing, management, and configuration with
your XTM device, see the Wireless section of the Fireware XTM Web UI or WSM Help at
your XTM device, see the Wireless section of the Fireware XTM Web UI or WSM Help at
.