Elo Touch Solution 22C3 E352793 ユーザーズマニュアル

 

You can add a fingerprint reader to the C-Series touchcomputer to any of the three 

mounting locations located on the display head top, left, and right. Software 

application and drivers can be found in the following directory or on 

www.elotouch.com

  

C:\EloTouchSystems\Peripherals 

The fingerprint reader is powered by the USB bus. The reader optically scans the 

fingerprint when the user touches the glowing window. Optical technology gives 

the highest quality fingerprint scans and reliability. 

Fingerprint reader specifications are shown in the table below.  

Fingerprint reader 

DigitalPersona U.are.U 

Power supply 

5.0VDC +/- 0.25V 

Current draw – scanning mode 

190 mA (typical) 

Current draw – idle mode 

140 mA (typical) 

Current draw – suspend mode 

1.5 mA (typical) 

Image resolution 

512 dpi 

Image color 

8-bit gray level 

Scan capture size 

14.6mm (nominal width) x 18.1mm (nominal length)

Image capture speed 

100 ms 

USB type 

1.0, 1.1, or 2.0 

Operating temperature 

0 to 40°C 

Electrostatic discharge (ESD) 

Up to 15kV mounted in case 

Part number 

E375206 

4.  Double-click the Fingerprint Reader Test icon to start the test application.  

5.  Place your finger on the fingerprint reader sensor and verify that the image of 

your fingerprint is displayed on the application window.