HP 701977-A41 ユーザーズマニュアル
Bluetooth module cable
NOTE:
The Bluetooth module cable is included in the Cable Kit, spare part number 652545-001.
Before removing the Bluetooth module cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
5.
Remove the service access cover (see
6.
).
7.
Remove the keyboard (see
8.
Remove the top cover (see
).
9.
).
10.
).
Remove the Bluetooth module cable:
1.
Position the computer right-side up with the front toward you.
2.
Disconnect the Bluetooth cable (1) from the system board.
3.
Remove the Bluetooth cable (2).
Reverse this procedure to install the Bluetooth module cable.
System board
NOTE:
All system board spare part kits include replacement thermal material.
Component replacement procedures 103