EK Water Blocks EK-Ekoolant Blood RED 3830046999610 製品データシート
製品コード
3830046999610
Page 1/3
EK-Ekoolant
MATERIAL SAFETY DATA SHEET
1.
IDENTIFICATION OF THE SUBSTANCE/PREPERATION AND COMPANY
Product Name: EK‐Ekoolant
Use: Liquid for Corrosion protection and heat transfer for computer water cooled systems.
Manufacturer/Supplier: EKWB d.o.o.
Address: Pot za Brdom 100, 1000 Ljubljana, Slovenia ‐ EU
Telephone number: +386 1 620 46 90
E‐Mail: info@ekwb.com
Use: Liquid for Corrosion protection and heat transfer for computer water cooled systems.
Manufacturer/Supplier: EKWB d.o.o.
Address: Pot za Brdom 100, 1000 Ljubljana, Slovenia ‐ EU
Telephone number: +386 1 620 46 90
E‐Mail: info@ekwb.com
2.
COMPOSITION/INFORMATION ON PRODUCT INGREDIENTS
Low oral toxicity proprietary antifreeze formulation classified as Generally Regarded as Safe as a food additive and
not classified as harmful for handling or transport purposes. However we do recommend good working practices
are employed and personal protection gear is worn when handling any chemical.
not classified as harmful for handling or transport purposes. However we do recommend good working practices
are employed and personal protection gear is worn when handling any chemical.
COMPONENT NAME
CAS no
CONCENTRATION
R PHASES
1. Propane‐1,2‐diol with corrosion inhibitors.
57‐55‐6
10‐25%
Not Classified
3.
HAZARDS IDENTIFICATION
Main Hazards: Not classified as a hazard or environmental hazard under current legislation
4.
FIRST AID MEASURES
After Inhalation: Tickle of the throat and heavy breathing may occur. Remove person to fresh air immediately.
Perform artificial respiration if breathing has stopped. Keep the affected person warm and at rest. Get medical
attention.
After eye contact: Irritation and reddening can occur. Wash eyes promptly and rinse for 15 minutes. Get medical
attention.
Perform artificial respiration if breathing has stopped. Keep the affected person warm and at rest. Get medical
attention.
After eye contact: Irritation and reddening can occur. Wash eyes promptly and rinse for 15 minutes. Get medical
attention.
After skin contact: Irritation of the skin can occur in the contact area. Remove affected person from source of
contamination. Wash skin with soap or mild detergent.
After ingestion: Can cause sickness. Rinse mouth thoroughly. Do NOT induce vomiting. Get medical advise.
contamination. Wash skin with soap or mild detergent.
After ingestion: Can cause sickness. Rinse mouth thoroughly. Do NOT induce vomiting. Get medical advise.
5.
FIRE-FIGHTING MEASURES
Extinguishing Media: Use appropriate extinguishing media for surrounding fire:
‐
Alcohol resistant foam
‐
Carbon Dioxide (CO2)
‐
Dry chemicals, etc.
Special Hazards of Product: Acrid smoke/fumes. Carbonyl compounds. Acetic acid.
Protective equipment for firefighting: Wear none air circulation depended respirator/apparatus.
Protective equipment for firefighting: Wear none air circulation depended respirator/apparatus.
6.
ACCIDENTAL RELEASE MEASURES
Personal Precautions: No special precautions necessary.
Environmental Precautions: Prevent the material from entering drains, sewers, ground or water courses without
pre‐treatment.
Spillages: Drain the product if necessary. Clean with absorbent material and dispose.
Environmental Precautions: Prevent the material from entering drains, sewers, ground or water courses without
pre‐treatment.
Spillages: Drain the product if necessary. Clean with absorbent material and dispose.
7.
HANDLING AND STORAGE
Handling: No special measures necessary.
Protect against fire and explosion. Take precautionary measures against static discharge.
Storage: Containers/Bottles should be: tightly sealed and dry, kept in cool and sun‐protected place. An original
HDPE/PET bottle is advised.
Protect against fire and explosion. Take precautionary measures against static discharge.
Storage: Containers/Bottles should be: tightly sealed and dry, kept in cool and sun‐protected place. An original
HDPE/PET bottle is advised.