Addonics RAID Tower Mini RTM2233EU3 プリント

www.addonics.com

Addonics Technologies Inc.

1918 Junction Avenue, San Jose, CA 95131

Phone: 408.573.8580 | Fax: 408.573.8588

    

INTRODUCTION

 

 

The RAID Tower Mini is built basing on the Mini Storage Tower 
platform features increased portability by reducing the size and weight 
to half of the RAID Tower IV. Depending on the model, up to four 3.5" 
SATA or eight 2.5" SATA hard drives can be installed into the RAID 
Tower Mini. The drives can be configured as a RAID set and be 
connected to the computer via USB 3.0, USB 2.0 or the high speed 
eSATA connection. RAID Tower Mini comes with a low noise cooling 
fan and stylish design with swing open well ventilated front panel for easy drive access. Each model comes with 
everything needed for connecting to the computer. All is needed is to add your own hard drives and configure the 
RAID via either a simple on board rotary switch or software utility depending on the RAID Tower model.

FEATURES

• Connect to system via eSATA or USB 3.0 / 2.0 port (3 feet eSATA cable and 6 feet USB 3.0 cable are included)
• Install up to two 2.5" and three 3.5" SATA hard drives of any capacity (drives not included).
• 2.5" hard drives are inserted or removed from drive bay without any special tool
• 3.5" Drives are mounted onto the tower chassis using screws.
• Drives can be configured as RAID0 (Striping), RAID1 (Mirroring), RAID 5 (Parity), RAID10 (Mirrored Striped), 
  JBOD (Concatenation), Clone Mode (N-Way Mirror) using built-in hardware RAID
• RAID setting via software utility under Windows or via dip switches on the back
• OS independent, can be used on any system
• RAID diagnostic via LED light or utility software under Window
• Attach to LAN via an optional NAS 3.0 adapter
Components list made up this model:
Mini Storage Tower (MST-B with SCSI-I back panel), 5-port HPM-XU (AD5HPMREU), 6 feet A-B USB cable 
(AAUSBAB6F), 3 feet eSATA cable (AAESATA100C)