Addonics RTIV35M2SU3 プリント

www.addonics.com

Addonics Technologies Inc.

1918 Junction Avenue, San Jose, CA 95131

Phone: 408.573.8580 | Fax: 408.573.8588

    

INTRODUCTION

 

FEATURES

 

• Connect to system via USB 3.0 / 2.0 or eSATA port (connecting cables included).

• Install up to three 3.5" SATA hard drives of any capacity (drives not included).

• Install up to two 2.5" SATA hard drive of any capacity (drives not included).

• Drives can be configured as RAID0 (Striping), RAID1 (Mirroring), RAID 5 (Parity), RAID10 (Mirrored Striped), 

  JBOD (Concatenation), Clone Mode (N-Way Mirror) using built-in hardware RAID or as five individiual drives 

  without RAID

• Individual drive setting requires connecting to Port Multiplier compatible controller or USB port

• RAID setting via software utility under Windows or via dip switches on the back

• OS independent, can be used on any system

• RAID diagnostic via LED light or utility software under Window
Components list made up this model:

Storage Tower (STMPC-B) with SCSI-I back panel, 5-port HPM-XU (AD5HPMREU), one Snap-In double drive 

(AE25SNAP2SA), three Snap-In Mobile Rack (AESNAPMRSA), 6 feet USB 3.0 cable (AAU3AB6F), 3 feet 

eSATA cable (AAESATA100C)

The RAID Tower IV is built basing on the Storage Tower platform that 

features two 5.25" drive bays in a lightweight and compact chassis with a 

stylish and functional front bezel. Depending on the model, up to six 3.5" 

hard drives can be installed into the RAID Tower IV. The drives can be 

configured as a RAID set and be connected to the computer via a single 

USB 3.0, USB 2.0 or the high speed eSATA connection. Each model comes 

with everything needed for connecting to the computer. All is needed is to 

add your own hard drives and configure the RAID via either a simple on 

board rotary switch or software utility depending on the model of the RAID Tower.

The RTIV35M2SU3 supports up to three SATA 3.5" drives and two 2.5" drives. The drives are directly inserted and 

removed using the Snap-In. It connects to the computer via USB 3.0/2.0 or eSATA.