Intermec 073295-001 ユーザーズマニュアル
Chapter 2 — Replacing Parts
Replacing the Main PCB
To replace the main PCB, you need the following tools:
• T10 Torx screwdriver
• Small Phillips screwdriver
You also need one of the following parts depending on the CK30
configuration:
configuration:
• CK30 64M/64M main PCB assembly (P/N 072291S-007)
• CK30 32M/32M main PCB assembly (P/N 072926S-008)
• LCD support bar (P/N 073497-002)
• KA22 x 6 WN 1412 Elco screw (591825-001)
To replace the main PCB
1
Open the CK30. For help, see “Opening the CK30” on page 9.
2
Disconnect the power/good read indicator light pipe assembly cable
and the speaker PCB assembly cable from the main PCB.
and the speaker PCB assembly cable from the main PCB.
Power/good
read indicator
light pipe
assembly
cable
read indicator
light pipe
assembly
cable
Speaker
PCB assembly
cable
PCB assembly
cable
3
Remove the radio and antenna assembly or the Ethernet card. For help,
see the appropriate procedure.
see the appropriate procedure.
4
Remove the two Phillips screws with captive washers from the top of the
main PCB and gently separate the main PCB from the top cover.
main PCB and gently separate the main PCB from the top cover.
5
Detach the display flex cable and the keypad flex cable from the main
PCB and remove the main PCB.
PCB and remove the main PCB.
CK30 Handheld Computer Service Manual
15