HP ElitePad ST Suction Cup 714223-001 ユーザーズマニュアル
製品コード
714223-001
Speaker assembly
Description
Spare part number
Speaker assembly
709456-001
Before removing the speaker assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
5.
Remove the system board (see
6.
Remove the battery (see
7.
Remove the docking connector (see
Remove the speaker assembly:
1.
Release the tabs (1) built into the bottom case that secure the speaker cable.
2.
Remove the four Phillips PM1.4×2.3 screws (2) that secure the speaker assembly to the
bottom case.
bottom case.
3.
Remove the speaker assembly (3).
Reverse this procedure to install the speaker assembly.
58
Chapter 4 Removal and replacement procedures