HP 701977-261 ユーザーズマニュアル
4.
Insert a small tool at an angle through the hole in the optical drive bay at an angle to push out
the top edge of the keyboard. This gives you access to the back of the keyboard and releases
the top edge of the keyboard.
the top edge of the keyboard. This gives you access to the back of the keyboard and releases
the top edge of the keyboard.
NOTE:
Make sure that the optical drive or upgrade hard drive have been removed before
performing this procedure.
5.
Turn the computer right-side up, with the front toward you.
6.
Open the display as far as it will open.
7.
Lift the top edge (1) of the keyboard until it rests at an angle.
8.
Slide the keyboard back toward the display (2).
9.
Release the keyboard ZIF connector (1) and lift the keyboard cable (2) to release it.
74
Chapter 4 Removal and replacement procedures