Cisco Content Engine NM-Basic Perf-40GB NM-CE-BP-40G-K9= データシート

製品コード
NM-CE-BP-40G-K9=
ページ / 8
Cisco Systems, Inc.
All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 1 of 8
Data Sheet
Cisco 2691, 3600 Series, and 3700 Series ATM OC-3 155-Mbps
Network Modules
C
ISCO
S
YSTEMS EXTENDS
WAN
CONNECTIVITY BY ADDING HIGH
-
SPEED
ATM
ACCESS TO REMOTE BRANCH OFFICES WITH THE
C
ISCO
2691,
3600,
AND
3700
SERIES
ATM OC-3
NETWORK MODULES
.
Overview
Three 155-Mbps ATM OC-3 network modules are available on the Cisco 3620 and 3640
starting with Cisco IOS® Release 12.0(3)T. They are also now available on the Cisco 2691
and Cisco 3725 in starting in IOS release 12.2(13)T. These three network modules support
STS-3c and STM-1 framing standards over multimode, single-mode intermediate-reach, and
single-mode long-reach fiber optic interfaces. All three versions consist of a single-port
network module with SC type connectors. The single-mode ATM network modules provide
high-speed trunking for users with access to fiber WAN, while multimode is ideal for
connecting high-speed servers, switches, or hubs equipped with and OC-3/STM-1 fiber
connections.
All three versions support the ATM Forum standard ATM adaptation Layer 5 (AAL5) with
ATM QoS categories Unspecified Bit Rate (UBR), UBR+, Variable Bit Rate (VBR)-rt,
VBR-nrt, Available Bit Rate (ABR), and Constant Bit Rate (CBR) traffic classes support
supported. Voice over IP (VoIP) and H.323 over ATM can be supported over the WAN using
the currently available analog voice/fax network modules, and voice interface cards.
Three new Enhanced Performance (EP) ATM OC-3 network modules are released on Cisco
3745 to support the higher performance and better throughput. The ATM OC-3 EP network
modules are identical to the Non-EP version in terms of features supported and physical
specifications.
The ATM OC-3 network modules are supported on the Cisco 2691, 3620, 3640, 3660, and
3725 routers and the Enhanced Performance ATM OC-3 network modules are supported on
Cisco 3745 router only. (Cisco 3745 does not support Non-EP ATM OC-3 network
modules.) Cisco IOS "Plus" feature sets are required to support ATM. A maximum of one
ATM OC-3 network module is recommended on Cisco 2691, 3600 Series and 3725. A
maximum of two ATM OC-3 EP network module is recommended on Cisco 3745.