Stratasys Fortus 250mс FORTUS 250MС プリント
製品コード
FORTUS 250MС
At the core:
Advanced FDM Technology
™
Fortus systems are based
on Stratasys FDM — Fused
Deposition Modeling
on Stratasys FDM — Fused
Deposition Modeling
™
—
technology. FDM is the industry’s
leading additive manufacturing
technology, and the only one
that uses production grade
thermoplastics, enabling the most
durable parts.
leading additive manufacturing
technology, and the only one
that uses production grade
thermoplastics, enabling the most
durable parts.
Fortus systems use a wide range
of thermoplastics with advanced
mechanical properties so your
parts can endure high heat,
caustic chemicals, sterilization, and
high impact applications.
of thermoplastics with advanced
mechanical properties so your
parts can endure high heat,
caustic chemicals, sterilization, and
high impact applications.
No special facilities needed
You can install a Fortus 3D
Production System just about
anywhere. No special venting
is required because Fortus
systems don’t produce noxious
fumes, chemicals, or waste.
Production System just about
anywhere. No special venting
is required because Fortus
systems don’t produce noxious
fumes, chemicals, or waste.
No special skills needed
Fortus 3D Production Systems
are easy to operate and maintain
compared to other additive
fabrication systems because there
are no messy powders or resins
to handle and contain. They’re so
simple, an operator can be trained
to operate a Fortus system in less
than 30 minutes.
are easy to operate and maintain
compared to other additive
fabrication systems because there
are no messy powders or resins
to handle and contain. They’re so
simple, an operator can be trained
to operate a Fortus system in less
than 30 minutes.
Get your benchmark on the
future of manufacturing
Fine details. Smooth surface
finishes. Accuracy. Strength. The
best way to see the advantages of
a Fortus 3D Production System is
to have your own part built on a
Fortus system. Get your free part at:
finishes. Accuracy. Strength. The
best way to see the advantages of
a Fortus 3D Production System is
to have your own part built on a
Fortus system. Get your free part at:
www.fortus.com/benchmark
Fortus 3D Production Systems
Stratasys Incorporated
7665 Commerce Way
Eden Prairie, MN 55344
+1 888 480 3548 (US Toll Free)
+1 952 937 3000
+1 952 937 0070 (Fax)
Stratasys Incorporated
7665 Commerce Way
Eden Prairie, MN 55344
+1 888 480 3548 (US Toll Free)
+1 952 937 3000
+1 952 937 0070 (Fax)
info@stratasys.com
ISO 9001:2008 Certified
Fortus 3D Production Systems
Stratasys GmbH
Weismüllerstrasse 27
60314 Frankfurt am Main
Germany
+49 69 420 994 30 (Tel)
+49 69 420 994 333 (Fax)
Stratasys GmbH
Weismüllerstrasse 27
60314 Frankfurt am Main
Germany
+49 69 420 994 30 (Tel)
+49 69 420 994 333 (Fax)
europe@stratasys.com
©2011 Stratasys Inc. All rights reserved. Stratasys, FDM and Fortus are registered trademarks and Fused Deposition Modeling, FDM Technology,
Fortus 250mc, Fortus 360mc, Fortus 400mc, Fortus 900mc, Insight, Control Center and FDM TEAM are trademarks of Stratasys Inc., registered in
the United States and other countries. *ULTEM 9085 is a trademark of SABIC Innovative Plastics IP BV. All other trademarks are the property of
their respective owners. Product specifications subject to change without notice. Fortus-SS-250mc-01/13
Fortus 250mc, Fortus 360mc, Fortus 400mc, Fortus 900mc, Insight, Control Center and FDM TEAM are trademarks of Stratasys Inc., registered in
the United States and other countries. *ULTEM 9085 is a trademark of SABIC Innovative Plastics IP BV. All other trademarks are the property of
their respective owners. Product specifications subject to change without notice. Fortus-SS-250mc-01/13
For more information about Fortus systems, materials and applications, call 888.480.3548 or visit
www.fortus.com
FORTUS 250mc
SYSTEM CONFIGURATION
Build Envelope (XYZ)
10 x 10 x 12 inches (254 x 254 x 305 mm)
Material Delivery
One (1) Build material cartridge: 56.3 in
3
(923 cc)
One (1) Support material cartridge: 56.3 in
3
(923 cc)
MATERIAl OPTIONS
layer Thickness:
ABSplus-P430
0.013 inch (0.330 mm)
X
0.010 inch (0.254 mm)
X
0.007 inch (0.178 mm)
X
Support Structure:
Soluble
Available Colors:
Ivory
Red
Fluorescent Yellow
White
Blue
Custom Colors
Black
Olive Green
Dark Grey
Nectarine
OTHER SPECIFICATIONS
System Size/Weight
33 x 29 x 45 inches
(838 x 737 x 1143 mm)
With crate: 409 lbs. (186 kg)
Without crate: 326 lbs. (148 kg)
Achievable Accuracy
Parts are produced within an accuracy of
±
.0095 inch (
±
.241 mm)*
*Note: Accuracy is geometry dependent. Achievable accuracy specification
derived from statistical data at 95% dimensional yield.
Network Communication
10/100 base T connection. Ethernet protocol.
Operator Attendance
Limited attendance for job start and stop required.
Operating Environment
Maximum room temperature of 86°F (30°C).
Relative humidity range: 30 to 70 percent, non condensing
Power Requirements
110–120 VAC, 60 Hz, minimum 15A dedicated circuit; or 220–240 VAC 50/60 Hz,
minimum 7A dedicated circuit.
Regulatory Compliance
CE / ETL
Software
All Fortus systems include Insight™ and Control Center™ job processing and
management software.
management software.
SYSTEM SPECIFICATIONS