Philips HTB5544D/F7 ユーザーズマニュアル

25

English

EN

Note

 

•

required (see 'Option 1: Connect to TV through HDMI 

(ARC)' on page 23).

Option 1: Connect audio through a 

digital optical cable

Best quality audio 

  

1 

Using an optical cable, connect the 

OPTICAL connector on your home 

theater to the OPTICAL OUT connector 

on the TV or other device. 

•  The digital optical connector might be 

labeled SPDIF or SPDIF OUT. 

Option 2: Connect audio through a 

digital coaxial cable

Good quality audio 

 

1 

Using a coaxial cable, connect the 

COAXIAL connector on your home 

theater to the COAXIAL/DIGITAL OUT 

connector on the TV or other device. 

•  The digital coaxial connector might be 

labeled DIGITAL AUDIO OUT. 

TV

Option 3: Connect audio through 

analog audio cables

Basic quality audio

1 

Using an analog cable, connect the AUX 

connectors on your home theater to the 

AUDIO OUT connectors on the TV or 

other device.

  

Set up speakers

Set up the speakers manually to experience 

customized surround sound.
Before you start

Make the necessary connections described in 

the quick start guide, and then switch the TV to 

the correct source for your home theater.

 

1 

Press   (Home).

2 

Select [Setup], and then press OK.

3 

Select [Audio] > [Speaker Setup].

4 

Enter the distance for each speaker, and 

then listen to the test tones and change 

the volume. Experiment with the speaker 

positions to find the ideal setting.

Set up EasyLink (HDMI-CEC 

control)

This home theater supports Philips EasyLink, 

which uses the HDMI-CEC (Consumer 

Electronics Control) protocol. EasyLink-

VCR

HTB5544D_F7_UM_V1.0.indb   25

2013/5/24   11:46:42