Da-Lite Tensioned Advantage Deluxe Electrol 88279 プリント
製品コード
88279
SPECIFICATION DATA
Tensioned advanTage
®
deluxe
elecTrol
®
Automatic Electric Projection Screen Model
S
UGGESTED SPECIFICATIONS:
projection screen(s),
(H) x
( W ) . T h e Te n s i o n e d
Advantage
®
Deluxe screen shall have two motors, one to operate door and one to operate screen. Door motor electrically operated 120
volt (60 Hz) not more than 1.2 amp. Shall have motor mounted inside the roller, to be three wire with ground, quick reversal type, oiled
for life, with automatic thermal overload cutout, integral gears, capacitor and an electric brake to prevent coasting. To have pre-set but
adjustable limit switches to automatically stop fabric door in the ”down“ position. The door will lift to the closed position where a micro
switch shall cut off the electrical current to the door motor. The roller to be of rigid aluminum. Screen motor is electrically operated 120
volt (60 Hz) not more than 2.4 amp. Shall have motor mounted inside the roller, to be three wire with ground quick reversal type, oiled for
life, with automatic thermal overload cutout, integral gears, capacitor and an electric brake to prevent coasting. To have pre-set but
adjustable limit switches to automatically stop picture surface in the ”up“ and ”down“ positions. The roller to be of rigid metal. Screen
fabric to be seamless, flame retardant and mildew resistant vinyl, with black masking borders standard. Each side of the fabric to have
tab guide cable system to maintain even lateral tension and hold surface flat. Custom slat bar with added weight maintains vertical
tension on the screen surface. The ends of the slat to be protected by heavy duty plastic caps enclosing a preset adjustable mechanism
for screen tensioning. Case shall be a white powder coated extruded aluminum. Bottom of case to be self-trimming with a built-in flange
around the bottom of the case. A section of the bottom of the case shall be an aluminum door equipped with hinges so that it opens and
closes automatically with the lowering and raising of the picture surface. The balance of the bottom of the case shall be a second hinged
aluminum door with manual opening to provide access. Hinges shall be mounted in a concealed way. Junction box shall be internally
integrated into the housing making it possible to install the housing and wire to the building’s electrical system during construction. The
junction box shall contain a quick connect connector that is mounted in the housing for easy plug-in connection to the motorized fabric
and roller assembly. The motorized fabric and roller assembly to be installed in the case at the factory or at a later time at the job site. To
be complete with integrated low voltage control unit and three position control switch and cover plate. Suitable for use in environmental
air space in accordance with section 300-22 (c) of the National Electric Code, and sections 2-128, 12-010 (3) and 12-100 of the Canadian
Electrical Code, part 1, CSA C22.1. Screen to be listed by Underwriters’ Laboratories.
All viewing surfaces will be seamless.
All viewing surfaces are standard with black backing except Da-Tex
All viewing surfaces are standard with black backing except Da-Tex
®
and Dual Vision.
Audio Vision, High Contrast Audio Vision, High Contrast Cinema Perf and HD Progressive 1.1 Perf available in sizes up to 87" x 116" in Video Format
and 78" x 139" in HDTV Format.
9
1
/
4
"
(SUGGESTED)
3
/
8
"
THREADED ROD (NOT
INCLUDED) ATTACHED
TO MOUNTING
BRACKET
FINISHED CEILING
SELF-TRIMMING
FLANGE
FLANGE
7
1
/
4
"
8
3
/
4
"
DOOR
ROLLER
ROLLER
SCREEN
ROLLER
ROLLER
SCREEN DOOR
ACCESS
DOOR
DOOR
AUDIENCE
SIDE
SIDE
SELF-TRIMMING
FLANGE
3
3
/
8
"
5
3
/
8
"
CASE LENGTH
VARIABLE POSITION
MOUNTING BRACKETS
7
1
/
4
"
7
5
/
8
"
MOTOR END
ELECTRICAL
JUNCTION BOX
7
1
/
4
"
7
5
/
8
"
SUGGESTED CEILING
INSTALLATION
GreenGuard
®
and GreenGuard
®
Children
and Schools Certified.
Optional Accessories:
o
Optional Accessories:
o
Wireless Remote Control for LVC.
o
Radio Frequency Remote
o Radio Frequency Range Extender
o
Infrared Remote
o
Key Locking Cover Plate for 120 V Switch or LVC.
o
220/240 Volt (50 Hz) motor.
o
Video Projector Interface Control - built-in
o
SCB-100 RS-232 Serial Control Board - external.
o
NET-100 Ethernet-Serial Adapter
o
SCB-100 RS-232 Serial Control Board - built-in
o
NET-100 Ethernet-Serial Adapter
DA-LITE SCrEEN COMPANy LLC
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
P 800-622-3737 / 574-267-8101
F 877-325-4832 / 574-267-7804
www.da-lite.com
e-mail: info@da-lite.com
o
HD Progressive 0.6
o
HD Progressive 0.9
o
HD Progressive 1.1
o
Da-Mat
®
o
High Contrast Da-Mat
®
o
Pearlescent
o
Cinema Vision
o
High Contrast Cinema Vision
o
High Contrast Cinema Perf
o
HD Progressive 1.1 Perf
o
Audio Vision
o
High Contrast Audio Vision
o
Da-Tex
®
(Rear)
o
Dual Vision
WHEN OrDErING, MArK APPrOPrIATE SELECTIONS:
Select size from charts on the opposite side.
Select viewing surface:
Select size from charts on the opposite side.
Select viewing surface: