APC NetBotz 320 Rack Appliance NBRK0320E ユーザーズマニュアル

Edit.

2. The Edit Periodic E-mail Report window opens. This window contains the following fields:

3. Type the appropriate values in the fields. 

4. Specify Advanced Scheduling for the Periodic Report (optional). By default, all Periodic Reports 

will be generated according to the Interval value you specify. However, you can specify that a 
Periodic Report will be active only occur during specific time ranges. To configure Advanced 
Scheduling: 

a. Click Advanced Scheduling.... The Advanced Scheduling window opens. 

b. By default, all time periods in the schedule are set to Enabled. To disable the Periodic Report for 

a currently enabled period of time, highlight the period of time by clicking-and-dragging over the 
desired time range, and then click Disable. To enable the Periodic Report for a currently disabled 
period of time, highlight the period of time by clicking-and-dragging over the desired time range, 
and then click Enable. 

Enabled

Check this check box to enable periodic e-mail reporting.

Include camera pictures

Check this check box to include current image captures by 
Camera Pod 120s connected to the appliance in the e-mailed 
report. 

Include Maps

Check this check box to include any maps that are stored on the 
appliance in the e-mailed report. 

Include Graphs

Check this check box to include graphs of the sensor readings 
for all sensors that are associated with the appliance in the e-
mailed report. 

Interval

The frequency with which e-mail reports will be generated.

Sensor Priority

Acts as a filter that can be used to limit the amount of sensor 
data that is included with the periodic report. You can select 
High, Medium, or Low priority settings:
• High: Only sensor data associated with physical sensors that 

are integrated with or connected to the appliance are included 
in the report. Sensor data associated with remote devices, 
such as MIB II data gathered from remote targets using Basic 
Device Crawlers and Advanced Data that is gathered using 
add-on applications such as Advanced Device Crawlers, is not 
included in the report.

• Medium: Sensor data associated with physical sensors and 

with Advanced Data sensor sets from remote devices (such as 
that which is gathered using Advanced Device Crawlers) is 
included in the report. Data associated with remote devices 
that is not grouped in an Advanced Data sensor set, such as 
MIB II data gathered from remote targets using Basic Device 
Crawlers, is not included in the report.

• Low: Sensor data from all sensors is included in the report.

E-mail Addresses

The addresses to which periodic e-mail reports will be 
delivered.