HP 721953-071 ユーザーズマニュアル
Optical drive
NOTE:
All optical drive spare part kits include an optical drive bezel, bracket, and screws.
Description
Spare part number
DVD-ROM drive
722829-001
Blu-ray ROM DVD±RW SuperMulti DL Drive (Intel models only)
722828-001
DVD±RW SuperMulti DL Drive
722830-001
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the service door (see
).
Remove the optical drive:
1.
Position the computer upside-down.
2.
Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.
3.
Push the optical drive tab (2) to release the optical drive from the computer.
Component replacement procedures
43