Cisco AIM supporting voice/fax DSP features, spare AIM-VOICE-30= データシート

Cisco Systems, Inc.

All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.

Page 1 of 12

 and

 for the Cisco 2600,

2600XM, 2691, 3660 and Cisco 3700

The Cisco 2600 Series, Cisco 2600XM

Series, Cisco 2691, Cisco 3660, and

Cisco 3700 Series multiservice access

routers provide enterprises and service

providers a wide range of solutions for

data, voice, and video. These routers are

equipped with an Advanced Integration

Module (AIM) slot, which provides

customers the flexibility to deploy

additional features.

Three AIMs are described in this data sheet:

an ATM AIM called AIM-ATM, a Voice

AIM called AIM-VOICE-30, and a Voice +

ATM AIM called AIM-ATM-VOICE-30.

The AIM-ATM provides asynchronous

transfer mode (ATM) services to the WAN.

The AIM-VOICE-30 provides digital signal

processor (DSP) services, which can support

up to 30 medium-complexity or

16 high-complexity voice channels. The

AIM-ATM-VOICE-30 combines the

features from the AIM-ATM and

AIM-VOICE-30 modules onto a single

AIM module. These AIM modules

supplement the broad portfolio of Cisco

voice solutions and allow enterprises and

service providers the flexibility of

implementing ATM and voice solutions

on the routers.

The AIM-ATM optimizes the Cisco 2600,

2600XM, 2691, 3660, and Cisco 3700

Series modular multiservice routers by

offering ATM adaptation layer 2 (AAL2)

and ATM adaptation layer 5 (AAL5)

support for low-density T1/E1 data and

voice connections over ATM networks.

This AIM module allows service providers

and enterprise customers to take advantage

of the reliability and quality of service

(QoS) available with ATM connectivity.

The AIM-VOICE-30 contains DSPs

that can support up to 30

medium-complexity or 16 high-complexity

voice channels when used with the Voice/

WAN (VWIC-MFT) interface card. All DSP

voice features such as voice activity

detection, echo cancellation, and a full suite

of PBX/PSTN signaling protocols are

supported. When the AIM-VOICE-30

is used in a Cisco 2600, 2600XM, 2691,

3660, or Cisco 3700 Series Router, users

can use voice over IP (VoIP) or voice over

Frame Relay (VoFR) while freeing up the

network module slot for other applications.

When used with one of the various ATM

network modules, voice over ATM

(VoATM) and VoIP over ATM are

supported.