Emulex Single Channel 4Gb/s Fibre Channel PCI-X 2.0 HBA LP1150-F4 LP1150-F4 プリント
製品コード
LP1150-F4
ADDITIONAL FEATURES
Emulex LightPulse technology features
Frame-level Multiplexing and out-of-order frame
reassembly for maximum link utilization.
End-to-end data protection with hardware parity,
End-to-end data protection with hardware parity,
CRC, ECC and other advanced error checking
ensure that data is safe from corruption.
Beaconing support enables detection and
Beaconing support enables detection and
identification to improve manageability.
Detailed real-time event logging and tracing
Detailed real-time event logging and tracing
enables quick diagnosis of SAN problems.
Universal Boot capability allows the appropriate
Universal Boot capability allows the appropriate
boot environment to be automatically selected
for any given OS.
SOFTWARE FEATURES
Emulex feature-rich software simplifies and
speeds deployment and device management,
while reducing administration costs and
protecting your IT investment.
HBAnyware enables centralized discovery,
HBAnyware enables centralized discovery,
monitoring, reporting, and management of
both local and remote HBAs from a secure
remote client. HBAnyware provides in-depth
management capabilities including remote
firmware and boot code upgrades, beaconing,
statistics, and advanced diagnostics.
An extensive command line interface (CLI) is
available for scripting.
AutoPilot Installer simplifies the installation
AutoPilot Installer simplifies the installation
and configuration of drivers and management
applications for multiple HBAs on Windows
servers. A single installation of drivers and
applications eliminates multiple reboots and
ensures that each component is installed
correctly and the HBA is ready to use.
Emulex VMPilot™ enables rapid deployment and
Emulex VMPilot™ enables rapid deployment and
migration of virtual machines (VM) with SAN-
attached storage in a Microsoft Virtual Server
environment. Using a simple wizard, IT manager
can quickly create VMs with Virtual HBA ports
based on ANSI T11 N-Port ID Virtualization
technology.
Emulex management instrumentation is based
Emulex management instrumentation is based
on Open Management Standards. SMI-S and
common HBA API support enable seamless
upward integration into enterprise storage and
server management solutions.
Specifications
www.emulex.com
Corporate HQ: 3333 Susan Street, Costa Mesa, CA 92626 (714) 662-5600
Wokingham, U.K. (44) 118-977-2929 | Paris, France (33) 41-91 19-90
Beijing, China (86 10) 6849-9547
07-447 3/07
STANDARDS
ANSI Fibre Channel: FC-PH-3, FC-PI-2,
ANSI Fibre Channel: FC-PH-3, FC-PI-2,
FC-FS, FC-AL-2, FC-GS-4, FC-FLA,
FC-PLDA, FC-TAPE, FCP-2, and RFC 2625
(IP over FC)
PCI-X 2.0 and PCI 3.0
Fibre Channel class 2 and 3
PHP hot plug-hot swap
PCI-X 2.0 and PCI 3.0
Fibre Channel class 2 and 3
PHP hot plug-hot swap
ARCHITECTURE
Single-channel
4Gb/s, 2Gb/s or 1Gb/s FC Link speeds
Single-channel
4Gb/s, 2Gb/s or 1Gb/s FC Link speeds
automatically detected
Integrated data buffer and code
Integrated data buffer and code
space memory
COMPREHENSIVE OS SUPPORT
Windows Server 2003, Windows 2000,
Windows Server 2003, Windows 2000,
Linux, NetWare, VMware
HARDWARE ENVIRONMENTS
x86, x64 and Intel
x86, x64 and Intel
®
Itanium
®
processor
family
32/64-bit 33/66MHz PCI (3.3V signaling)
66/100/133/266MHz PCI-X bus speeds
32/64-bit 33/66MHz PCI (3.3V signaling)
66/100/133/266MHz PCI-X bus speeds
OPTICAL
Data rates: 1.0625, 2.125 and 4.25Gb/s
Data rates: 1.0625, 2.125 and 4.25Gb/s
(auto-detected)
Optics: Short wave lasers with LC
Optics: Short wave lasers with LC
type connector
Cable: 50/125
Cable: 50/125
µ
m, up to 150 meters at
4Gb/s 62.5/125
µ
m, up to 70 meters
at 4Gb/s
PHySICAL DIMENSIONS
Short, low profile MD2 form factor card
167.64mm x 64.42mm (6.60” x 2.54”)
Standard bracket (low profile available)
Short, low profile MD2 form factor card
167.64mm x 64.42mm (6.60” x 2.54”)
Standard bracket (low profile available)
POWER AND ENVIRONMENTAL
REQUIREMENTS
Volts: +3.3 and +5 VDC
Operating temperature: 0° to 55°C
Volts: +3.3 and +5 VDC
Operating temperature: 0° to 55°C
(32° to 131°F)
Airflow required: 100 lf/m
Storage temperature: -40° to 70°C
Airflow required: 100 lf/m
Storage temperature: -40° to 70°C
(-40° to 158°F)
Relative humidity: 5% to 95%
Relative humidity: 5% to 95%
non-condensing
AGENCy APPROVALS
Class 1 Laser Product per DHHS 21CFR (J)
Class 1 Laser Product per DHHS 21CFR (J)
and EN60825-1
UL recognized to UL 60950-1
CUR recognized to CSA22.2,
UL recognized to UL 60950-1
CUR recognized to CSA22.2,
No. 60950-1-03
TUV certified to EN60950-1
FCC rules, Part 15, Class A
ICES-003, Class A
EMC Directive 2004/108/EEC (CE Mark)
-EN55022, Class A
-EN55024
Australian EMC Framework (C-Tick Mark)
-AS/NZS CISPR22, Class A
VCCI, Class A
MIC (Korea), Class A
BSMI (Taiwan), Class A
RoHS Compliant (Directive 2002/95/EC)
TUV certified to EN60950-1
FCC rules, Part 15, Class A
ICES-003, Class A
EMC Directive 2004/108/EEC (CE Mark)
-EN55022, Class A
-EN55024
Australian EMC Framework (C-Tick Mark)
-AS/NZS CISPR22, Class A
VCCI, Class A
MIC (Korea), Class A
BSMI (Taiwan), Class A
RoHS Compliant (Directive 2002/95/EC)
for environmental requirements.
ORDERING INFORMATION
LP1150-F4
LP1150-F4
Single-channel, embedded multi-mode
optic interface
This document refers to various companies and products by their trade names. In most, if not all cases, their respective companies claim these designations as trademarks or registered
trademarks. This information is provided for reference only. Although this information is believed to be accurate and reliable at the time of publication, Emulex assumes no responsibility for
errors or omissions. Emulex reserves the right to make changes or corrections without notice.
LightPulse
®
LP1150
FIBRE
CHANNEL
4Gb/s
PCI-X 2.0 HOST BUS ADAPTERS