Rollei Mogopod 1 20943 プリント
製品コード
20943
Rollei Mogopod 1
www.rollei.com
exclusively made for Rollei
I like – on
facebook.com/rollei
facebook.com/rollei
Product information
Multifunctional photographic equipment for cameras and
camcorders
Can be used as monopod, stabilizer, microphone boom,
flashlight holder etc.
For use with most cameras and accessories
Contains: Mogopod main section, 3-legs, ball head, 3/8“ Adapter
Rollei Mogopod 1 is made
for photography Hobbyists
and Professionals. It is an easy
to take and multifunctional
photo graphic equipment, with
a special fast adjust system
and two different top exten-
sions. With the Mogopod 1
there is no more need for
complex photographic
accessories.
and Professionals. It is an easy
to take and multifunctional
photo graphic equipment, with
a special fast adjust system
and two different top exten-
sions. With the Mogopod 1
there is no more need for
complex photographic
accessories.
Technical data
Material
Aluminum
Colour
Black
Length
unfolded: 165 cm | folded: 77 cm
Ball Head Tolerance
only ± 0.05 mm
Load
max. 3.5 kg
Weight
1100 g
Subject to technical changes.
Extensions
The Mogopod 1 comes with two different top
extensions with 3/8“ screw or 1/4“ screw. With these
extensions all kind of video or camera equipment
can be connected to the Mogopod 1.
extensions with 3/8“ screw or 1/4“ screw. With these
extensions all kind of video or camera equipment
can be connected to the Mogopod 1.
Fast Adjustment System
The Mogopod 1 has a
unique drive system for a fast
adjustment of the height. It can
be used as monopod, flashlight
holder and microphone boom. Since
the Mogopod 1 can be stretched out
and draw back smoothly, it also can
be used as a camera crane.
Ball Head
With the special ball head
provided in the Mogopod 1,
it can not rotate in horizontal
direction. The size tolerance
of machining accuracy is
± 0.05 mm, so the locking
strength is larger than from
others with the same head
size.
provided in the Mogopod 1,
it can not rotate in horizontal
direction. The size tolerance
of machining accuracy is
± 0.05 mm, so the locking
strength is larger than from
others with the same head
size.
3-legs
The Mogopod 1 adopts the unique iFootage 3-legs
locking system. You only need to open or close the
legs, then twist the button at the bottom, and the
locking is completed.
locking system. You only need to open or close the
legs, then twist the button at the bottom, and the
locking is completed.
Surface
The Mogopod 1 is covered by
foam rubber with high stabi-
lity and long term resistance.
This makes the handle softer
and more flexible and works
also sound absorbing and
heat insulating.
foam rubber with high stabi-
lity and long term resistance.
This makes the handle softer
and more flexible and works
also sound absorbing and
heat insulating.
Mark
With precise marks on the tube and
a convenient locking system. The
marks are helpful to adjust the right
height and can be used also as a
measure tool.
1100 g
3.5 kg
24
Month Warranty
and Replacement
for DSLR
165 cm
77 cm