Saeco Super-automatic espresso machine HD8769/08 HD8769/08 ユーザーズマニュアル
製品コード
HD8769/08
20
ENGLISH
2
Remove the “INTENZA+” water fi lter from its packaging, immerse it ver-
tically (with the opening positioned upwards) in cold water and gently
press the sides so as to let the air bubbles out.
press the sides so as to let the air bubbles out.
3
Set the “INTENZA+” water fi lter according to the measurements per-
formed (see previous chapter) and indicated on the base of the fi lter:
A = soft water – equals 1 or 2 on the test strip
B = hard water (standard) – equals 3 on the test strip
C = very hard water – equals 4 on the test strip
B = hard water (standard) – equals 3 on the test strip
C = very hard water – equals 4 on the test strip
4
Insert the “INTENZA+ “water fi lter into the empty water tank. Press it
until it cannot move further down.
5
Fill the water tank with fresh water and reinsert it into the machine.
6
Dispense all the water of the tank by using the hot water function (see
chapter “Hot water dispensing”).
7
Fill the water tank again.
Gr
een
8
Press the “
” MENU button. The machine shows this display.
Y
ello
w
9
Press the “
” button to access the programming menu. Scroll the
pages by pressing the “ ” button until the following icon is displayed.