ABUS HSRM20000 プリント

ページ / 2
ABUS wireless smoke alarm device
Art. no. HSRM20000
•  More safety and wider ranges due to the possibility of cascading the detector
•  Detectors can be wirelessly networked
•  Provides reliable warnings in case of life-threatening smoke
•  Optical smoke detector with integrated piezo alarm sounder
•  Translucent status LEDs
The optical VdS wireless smoke alarm device reacts to visible fire smoke within its detection range. If an alarm
detects smoke particles in the air, all alarms in the building are triggered. The wireless smoke alarm device is
installed on the ceiling. Minimum distances to the wall (15 cm), corners (50 cm), etc., must be observed (for
details see the user guide). We recommend a separate detector for each hallway, staircase, living room, and
bedroom. If a detector detects smoke, the piezo sounder emits an alarm which is 85 dB loud – from all detectors
at the same time. The detector that first detected the smoke can be identified by an alarm tone that is different
from the others.<CRLF><CRLF>Up to 32 smoke detectors can be networked wirelessly – each with a
range of up to 30 m (additional wireless modules are not required). The cascading of the detectors guarantees a
high level of safety; an alarm is passed across the entire chain from the first to the last detector. The effective
range does however depend on the structural characteristics (a wireless test is recommended before installation).
The batteries recommended have a lifespan of up to 2 years. The detector reports a weak battery by emitting
regular beeps. We recommend that the detector be tested once per month. The detector is VdS-certified thanks to
the high level of safety and reliability it provides.
Page 1 of 2
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 09/2013