Philips DCB2270 DCB2270/10 ユーザーズマニュアル
製品コード
DCB2270/10
9
EN
• Press to switch this product
• between the working mode and the
normal standby mode, or
• from the eco power standby mode to
the working mode.
Set the clock
Note
•
During setting, if no action is made within 90 seconds,
the product exits clock setting without saving earlier
operations.
1
In standby mode, press and hold CLOCK
to enter the clock setting mode.
»
or
is displayed.
2
Press + VOL - or
/
to select
or
, and then press CLOCK.
•
: 24-hour time format
•
: 12-hour time format
»
The hour digits begin to blink.
3
Press + VOL -or
/
to set the hour,
and then press CLOCK.
»
The minute digits begin to blink.
4
Press + VOL - or
/
to set the
minute, and then press CLOCK.
5
Press + VOL - or
/
to select
or
,
and then press CLOCK.
•
: When you tune to
an RDS station that transmits time
signals, the product automatically
synchronizes its clock with the RDS
station.
•
: Not synchronize
the clock automatically.
»
The set clock is displayed.
Tip
•
This product will synchronize its clock with the current
DAB station or the connected iPod/iPhone/iPad.
Select a source
On the product, press SOURCE repeatedly to
select a source.
•
: the playlist on the
connected iPhone/iPod/iPad
•
: the audio input through the
AUDIO IN socket
•
: the disc in the disc compartment
•
: .mp3 files stored on the connected
USB storage device
•
: the DAB tuner
•
: the FM tuner
You can also press source buttons on the
remote control to select a source.
• FM/DAB: the FM tuner or DAB tuner
• DOCK/CD: the playlist on the connected
iPhone/iPod/iPad or the disc in the disc
compartment
• AUDIO IN/USB: the audio input through
the AUDIO IN socket, or the .mp3 files
stored on the connected USB storage
device
Adjust the brightness of LCD
display
1
In normal standby mode, press and hold
DISPLAY until
,
, or
is
displayed.
2
Press VOL +/- or / to select
,
, or
.