IQinVision Alliance-pro IQA32WX-A3 ユーザーズマニュアル

製品コード
IQA32WX-A3
ページ / 14
Architectural and Engineering Specification 
                
 
IQA32WI, IQA32WE, IQA32WX 
Page 1 of 14 
         Revision: (07302013) 
 
IQeye Alliance-pro Series, IQA32WI, IQA32WE, IQA32WX 
H.264, HD1080p, Color Indoor/Outdoor Vandal Resistant Network Dome Camera with Integrated 
Autofocus or Varifocal Lens 
PART 2 – PRODUCTS 
2.1  
MANUFACTURER 
A.  IQinVision 
33122 Valle Road 
San Juan Capistrano, CA 92675 
Phone +1.949.369.8100 
Fax +1.949.369.8105 
 
2.2 
DESCRIPTION 
 
The product specified shall be an all-in-one vandal/tamper resistant HD1080p resolution color 
dome camera designed for indoor/outdoor applications providing multiple H.264 (MPEG4, Part 
10) and simultaneous MJPEG streams that can be individually configured.  The dome camera 
was designed to provide 30fps at maximum resolution with audio, and shall conform to the 
ONVIF and PSIA standards.   
 
The camera uses a Wide Dynamic Range (WDR) sensor for enhanced image dynamic range and 
DTS (Direct-To-Storage) recording.  The camera offers Day/Night functionality with high 
sensitivity for use in low light indoor/outdoor applications, and is prepackaged with an 
autofocus or varifocal IR corrected lens to allow zoom and focus adjustment.  The dome camera 
is constructed of cast-aluminum housing with polycarbonate dome bubble and auto tracking 
inner liner.  The dome camera was designed to protect against water and dust to IP66 / NEMA 4 
standards.  Requiring low power the dome camera is PoE (IEEE 802.3af) compliant, and can be 
powered from 12-24VDC or 24VAC. 
 
2.3 
GENERAL REQUIREMENTS 
A.  The IP dome camera shall be a high impact aluminum, vandal resistant, Day/Night color dome 
camera with a progressive scan CMOS sensor. 
 
B.  The IP dome camera shall utilize a CMOS sensor that is 1/3-inch with a dichroic infrared mirror 
capable of producing HD1080p resolution. 
 
C.  The IP dome camera shall have no less than 1920(H) x 1080(V) pixels.