Saeco Super-automatic espresso machine HD8964/08 HD8964/08 ユーザーズマニュアル

81

81

The coff ee is too weak (see 
note).

This might occur when the machine 
is automatically adjusting the dose.

Brew a few coff ees as described in chap-
ter “Saeco Adapting System”.

The ground coff ee is too coarse.

Change coff ee blend or adjust the grind 
as explained in the “Adjusting the Ceramic 
Coff ee Grinder” chapter.

Coff ee is brewed slowly (see 
note).

The ground coff ee is too fi ne.

Change coff ee blend or adjust the grind 
as explained in the “Adjusting the Ceramic 
Coff ee Grinder” chapter.

Circuits clogged.

Perform a descaling cycle.

The brew group is dirty.

Clean the brew group (see the “Weekly 
Cleaning of the Brew Group” chapter).

Coff ee leaks out of the 
dispensing spout.

The dispensing spout is clogged or 
not correctly inserted.

Clean the dispensing spout and its holes 
and insert it back correctly.

 Note: 

these problems can be considered normal if the coff ee blend has been 
changed or if the machine has just been installed. In this case wait until 
the machine performs a self-adjusting operation as described in the “Saeco 
Adapting System” chapter.