IQinVision Alliance-mx IQM30NE-B5 ユーザーズマニュアル

製品コード
IQM30NE-B5
ページ / 11
Architectural and Engineering Specification 
                
 
IQM30NE-B5 
Page 1 of 11 
         Revision: D400001 (12152011) 
 
 
IQeye Alliance MX Series, IQM30NE-B5 
H.264, SD480p, Color Indoor/Outdoor Vandal Resistant Network Dome Camera with Integrated Lens 
PART 2 – PRODUCTS 
2.1  
MANUFACTURER 
A.  IQinVision 
33122 Valle Road 
San Juan Capistrano, CA 92675 
Phone +1.949.369.8100 
Fax +1.949.369.8105 
 
2.2 
DESCRIPTION 
 
 
The product specified shall be an all-in-one indoor/outdoor, vandal resistant dome enclosure 
 
with integrated H.264 (MPEG 4, Part 10) camera and varifocal lens providing SD480p resolution 
 
at full video frame rate of 60fps with audio.  Dual encoders allow simultaneous viewing of both 
 
H.264 and MJPEG video streams, and shall conform to the ONVIF, and PSIA standards. 
 
The camera offers Lightgrabber™II for enhanced image sensitivity and DTS (Direct-To-Storage)  
 
recording.  Requiring low power the camera is PoE (IEEE 802.3af) compliant.  The camera offers 
 
Day/Night functionality with high sensitivity for use in low light indoor/outdoor applications.  
 
The dome camera is constructed of cast-aluminum and tamper resistant clear polycarbonate 
 
dome bubble with inner liner and is IP66 / NEMA4 rated.  
 
2.3 
GENERAL REQUIREMENTS 
A.  The IP dome camera shall be a high impact aluminum, vandal resistant, Day/Night color dome 
camera with a progressive scan CMOS sensor. 
 
B.  The IP dome camera shall utilize a CMOS sensor that is 1/3-inch with a dichroic infrared mirror 
capable of producing SD480p resolution. 
 
C.  The IP dome camera shall have no less than 720(H) x 480(V) pixels. 
 
D.  The camera shall be H.264 (MPEG 4, Part 10) compliant. 
 
E.  The IP dome camera shall provide H.264 (MPEG 4, Part 10) and MJPEG video compression with 
simultaneous streaming of both image formats.