IQinVision Alliance-pro IQA32WI-A2 ユーザーズマニュアル

製品コード
IQA32WI-A2
ページ / 14
Architectural and Engineering Specification 
                
 
IQA32WI, IQA32WE, IQA32WX 
Page 3 of 14 
         Revision: (07302013) 
 
R.  The IP dome camera shall be Power over Ethernet (IEEE802.3af Class1) compliant for 
indoor/outdoor applications. 
 
S.  The IP camera shall offer an optional integrated 3 – 8mm autofocus megapixel lens (A3) with 
F1.3, and 1 / 2.7” optical format. 
 
T.  The IP camera shall offer an optional integrated 9 – 22mm autofocus megapixel lens (A2) with 
F1.5, and 1 / 2.7” optical format. 
 
U.  The optional autofocus lens (A2 & A3) shall be remotely controlled through the user interface 
simplifying the focusing process during the installation. 
 
V.  The optional autofocus lens (A2 & A3) shall have a remotely controlled zoom through the user 
interface. 
 
W.  The IP dome camera shall have an integrated 3-13mm megapixel IR corrected varifocal lens with 
F1.4, and 1/3” optical format. 
 
X.  The IP dome camera shall provide a cast-aluminum ceiling plate (IQA32NI) or cast-aluminum 
back box housing (IQA32NE & IQA32NX), polycarbonate dome and auto tracking inner liner. 
 
Y.  The IP dome camera (IQA32NE & IQA32NX) shall provide protection against water and dust up 
to IP66 / NEMA4 standards. 
 
Z.  The IP dome camera shall be designed to be surface mounted to a wall or ceiling and wall 
mounted with optional accessories.    
 
AA. The IP dome camera shall be designed to be mounted to a single or double gang outlet box. 
 
BB. The IP dome camera shall have a 3-axis gimbal providing 360˚pan, 90˚ tilt and 350˚ azimuth for 
easy camera positioning. 
 
CC. The IP dome camera minimum illumination requirement to produce an image in color mode will 
be 0.20 lux (0.02 fc) with an F1.4 lens. 
 
DD. The IP dome camera shall provide an automated IR filter that will automatically switch from 
color to monochrome enhancing low lighting or in applications where IR illumination is utilized.