Bosch D293A ユーザーズマニュアル

 

D286

Ionization smoke detector head

 

D603

Fixed‑temperature (135°F [57°C])

and Rate‑of‑Rise heat detector head

 

D604

Fixed‑temperature (135°F [57°C])

heat detector head

 

D605

Fixed‑temperature (190°F [88°C])

heat detector head

Modules

D275

End‑of‑line (EOL) supervision

module

Remote

Annunciators

DRA-5

Remote annunciator

Depending on local regulations, the bases can be
surface mounted using anchors, mollies, or wing nuts.
The bases can be directly mounted on single‑gang
switch boxes or mounted on four‑inch octagonal
electrical boxes using the supplied adaptor plate.

Notice
Ensure the volume of any electrical box used
accommodates the number and size of conductors
as specified by the National Electrical Code (NEC)
or any local regulations having jurisdiction.

Use one D293E Base for the last detector on the loop
or one D275 module per detector loop. Use the EOL
resistor(s) specified by the control panel
manufacturer.

Quant.

Component

1

D293A, D293E, or D293S Four‑wire Detector Base

1

Adaptor plate (P/N: 18851)

1

Hardware pack

1

Literature pack

Current (alarm):

12 VDC: 58 mA; 

24 VDC: 62 mA; 

30 VDC: 75 mA maximum

Current (standby):

0.12 mA maximum

Voltage (standby):

10 VDC to 30 VDC

Current (alarm):

12 VDC: 82 mA; 

24 VDC: 86 mA; 

30 VDC: 100 mA maximum

Current (standby):

24 mA at 12 VDC and 24 VDC

Voltage (standby):

10 VDC to 30 VDC

Alarm Current

(base):

12 VDC: 48 mA; 

24 VDC: 51 mA; 

30 VDC: 70 mA maximum

Alarm

Current(sounder):

12 VDC: 15 mA; 

24 VDC: 24 mA; 

30 VDC: 25 mA maximum

Voltage (base):

10 VDC to 30 VDC

Voltage (sounder):

12 VDC nominal, 10 VDC to 16 VDC; 

24 VDC nominal, 18 VDC to 30 VDC

Temperature

(operating):

+32°F to +100°F (0°C to +38°C)

Dimensions

(diameter):

6.375 in. (16.2 cm)

Alarm:

One normally-open (NO) relay

Auxiliary:

One set of Form C contacts rated for 62.5 VA,

0.5 A at 125 VAC and 30 W, 1.0 A at 30 VDC for

resistive loads

Alarm:

One normally‑open (NO) relay

Auxiliary:

One set of normally‑open (NO) contacts rated

for 62.5 VA, 0.5 A at 125 VAC and 30 W, 1.0 A

at 30 VDC for resistive loads

EOL:

One EOL relay rated for 10 W, 0.5 A at 100 VDC

for resistive loads

Auxiliary:

One set of normally‑open (NO) contacts rated

for 10 W, 0.5 A at 60 VDC for resistive loads

Sounder

Powered by external source

D293A Four‑wire Detector Base with Auxiliary Relay
(Form C)
Four‑wire detector base with an auxiliary Form C relay.
Order number 

2 | D293 Four‑wire Detector Bases