Axis PS-A UK 12866 ユーザーズマニュアル

製品コード

12866

AXIS 540/640 User’s Guide

Basic Installation

Connecting the printer to the Network

Follow the instructions below to connect a printer to the network via the AXIS
540/640 print server:

Caution!

1. Make sure that the printer is switched off and that the AXIS 540/640 external

power supply is disconnected.

2. Locate the serial number, found on the underside label of the AXIS 540/640, and

write it down. You will need this number during the network configuration.

Note:

3. Connect the AXIS 540/640 to the printer either directly to the parallel printer

port or using the optional printer cable extensions and velcro ribbons.

4. Connect your AXIS 540/640 to the network using either a twisted pair

(10baseT) or thin wire (10base2) cable.

5. For the AXIS 640/642 only: Slide the Ring Speed switch to 4 or 16, as appropriate

for your Token Ring network.

6. Switch on the printer and connect the external power supply to the AXIS

540/640. The power indicator light comes on. If the network indicator starts to
flash, the AXIS 540/640 is successfully connected to the network.

7. Press and release the test button on the AXIS 540/640 to print a test page. If the

AXIS 540/640 is correctly connected to the printer, the AXIS 540/640 internal
test page will be printed.

The external power supply you are using must be marked with the correct mains voltage! Refer to
Hardware Inventory, on page 6.

Each AXIS 540/640 Print Server is pre-configured with a unique node address that is identical
to the serial number.

ntosh