Fujitsu RX300 S8 VFY:R3008SX070DE + FSP:GD5SG3Z00DEPX3 データシート

製品コード
VFY:R3008SX070DE + FSP:GD5SG3Z00DEPX3
ページ / 11
Data Sheet
 FUJITSU Server PRIMERGY RX300 S8 Dual socket 2U rack server 
Page 4 / 11
www.fujitsu.com/fts
Memory notes
Max. 8 memory modules/CPU with UDIMM (low voltage or standard) OR quad-rank RDIMM; max. 12 memory 
modules/CPU with single or dual-rank  RDIMM or single, dual-rank or quad-rank  Load-Reduced (LR) DIMM.
Memory Mirroring with identical modules in both channel pairs of a bank (4 modules per bank), Rank sparing or 
Performance Mode with identical modules in all four channels (4 modules per bank).
Memory options
4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
8 GB (1 module(s) 8 GB) DDR3, registered, ECC, 1866 MHz, PC3-14900, DIMM
16 GB (1 module(s) 16 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
16 GB (1 module(s) 16 GB) DDR3, registered, ECC, 1866 MHz, PC3-14900, DIMM
32 GB (1 module(s) 32 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
64 GB (1 module(s) 64 GB) DDR3 LR, registered, ECC, 1333 MHz, PC3-10600, DIMM
Memory options
8 GB (1 module(s) 8 GB) DDR3, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM
Interfaces
USB 2.0 ports
10 x USB 2.0 (2x front, 4x rear, 2x internal for backup devices, 1x USB stick, 1x uSSD)
Graphics (15-pin)
2 x VGA (thereof 1x front optional)
Serial 1 (9-pin)
1 x serial RS-232-C,  usable for iRMC or system or shared
LAN / Ethernet
2 x Gbit/s Ethernet (RJ45) with upgrade options for additional 2x1 Gbit/s (RJ45), 4x 1 Gbit/s (RJ45) or 2x 10 Gbit/s 
(SFP+)
Management LAN (RJ45)
1 x dedicated management LAN port for iRMC S4  (10/100/1000 Mbit/s)
Management LAN traffic can be switched to shared onboard Gbit LAN port 
or optional Modular LAN 2x10 Gbit controller
Front Service LAN port as option
Onboard or integrated Controller
RAID controller
4 port for internal 3G SATA and SAS (as upgrade option with SAS enabling key) for HDDs with RAID 0/1/10 or SAS LTO 
device  (Intel C600)
additional RAID controller options are described under Components RAID controller
SATA Controller
Intel® C600, 1 x SATA channel for ODD
LAN Controller
Intel® Ethernet Controller I350, 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration), Modular integrated on-board LAN  
offers upgrade options for additional 2x1 Gbit/s , 4x 1 Gbit/s or 2x 10 Gbit/s.
PXE-Boot via LAN from PXE server, iSCSI boot (also diskless) 
Remote Management Controller
Integrated Remote Management Controller (iRMC S4, 256 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
Trusted Platform Module (TPM)
Infineon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express 3.0 x8
5 x Low profile 
PCI-Express 3.0 x16
2 x Low profile (2nd processor required)
Slot Notes
One PCIe Gen3 x8 slot may be occupied with a Modular integrated on-board LAN controller if configured.
One PCIe Gen3 x8 slot may be occupied with a Modular RAID controller if configured.
Important: 5 PCIe x8 slots are supported with the first processor. 7 PCIe slots (including 2 PCIe x16) are supported with 
two processors.
Possible slot length described in relevant system onfigurator. 
Drive bays
Storage drive bays
2.5-inch base unit (max. 16 x 2.5) or 3.5-inch base unit (max. 6 x 3.5)
Accessible drive bays
1 x 5.25/0.5-inch for ODD
1 x 5.25/1.6-inch for ODD or backup devices 
1 x 5.25/0.5-inch for Local Service Display 
Notes accessible drives
All possible options described in relevant system configurator.
Drive bays (Base unit specific)
Storage drive bays
Max 6 x 3.5-inch
Max 8 x 2.5-inch
Max 12 x 2.5-inch
Max 16 x 2.5-inch
Optional accessible drives
1x 3.5/1.6-inch bay for 
backup devices (occupies 2x 
3.5-inch HDD)
LTO 5.25” or DAT/RDX 3.5” 
possible