Canon VIZCAM 1000 A40-0002302 オーナーマニュアル
製品コード
A40-0002302
SPECIFICATIONS
Pickup Device:
Total Pixels
Effective Pixels
Horizontal Resolution
Vertical Resolution
Synchronization
White Balance
Electronic Shutter Speed
Gain Control
Negative Conversion
1/4” CCD
410,000
380,000 492 (V) x 768(H)
450 TV lines (at Center)
350 TV lines (at Center)
Internal Synchronization (2:1 interlaced)
Auto or Manual Adjustment
1/60, 1/100
Auto/Lock
Available
CAMERA
OUTPUT SIGNALS
All specifications subject to change without notice. Canon is a registered trademark of Canon, Inc. ©1997 Canon USA, Inc.
Visual Communication Systems Division
For purchase and technical assistance call 516-328-5960.
For literature and the dealer nearest you, call 1-800-OK CANON.
E-mail us at: vcsd@cusa.canon.com
Operating Temperature
Operating Humidity
Stored Dimensions
Weight
Accessories
Certification
RF Emission
41° F -95° F
20%-85%
6”(w) x 15”(H) x 8.5”(D)
Approximately 5 Ibs.
AC adapter (PA-V6) x1
Pin Cable x1
Pin Cable x1
UL1310 (only for AC adapter)
FCC Class B
OTHER SPECIFICATIONS
Power On/Off Switch
White Balance Adjust Knob
Auto White Balance On/Off
Negative/Positive Switch
Audio mute On/Off
AGC Lock (On/Off)
Electronic Shutter Switch
Black Seesaw Switch
Volume Knob
Alternative On/Off Control
Alternative On/Off Control
Alternative On/Off Control
Alternative On/Off Control
Slide Switch
CONTROL SWITCHES
Power Lamp
White Balance
Audio Mute
AGC Lock (On/Off)
Green Led
Green Led
Green Led
Green Led
DISPLAY LAMPS
Video Signal Composition
Video Output Impedance
Video Output Signal Level
Stereo Audio Output
Impedance (R,L)
NTSC standard color video signal: RCA pin jack (yellow)
Y/C separate signal: S (Y/C separation) terminal
Y/C separate signal: S (Y/C separation) terminal
75 Ohms
1Vp-p (luminance signal)
(Audio Mute switch available)
1 k ohm approximately RCA pin jack
LENS
Focal Length
Focus
Normal Aperture Ratio
Zoom
Iris Control
2.9 mm
Manual (8mm ~ infinite)
F2.8
Fixed
Manual (F2.8 ~ F16)
STEREO AUDIO INPUT SIGNALS
Microphone Input
Input Impedance
Minijack ø 3.5mm
5 k ohm approximately (No microphone power)
DOCUMENT SIZE
Min:
Max:
Postage Stamp Size
Letter Size (8 1/2” x 11”)
VIEW ANGLE
Nominal Angle of View
(Designed Value)
(Designed Value)
Horizontal 63 degree 39'
Vertical 49 degree 56'
Diagonal 75 degree 33'
Diagonal 75 degree 33'
POWER
Input Power
Power Consumption
12 VDC
AC adapter PA-V6 120VAC/60Hz
AC adapter PA-V6 120VAC/60Hz
7W
MOVABLE CAMERA ANGLE
Pan Angle
Tilt Angle
Rotatable Camera Head
Plus or minus 90 degree, pivot on the base
3 joint arm
Greater than 180 degrees
White Balance Adjust Knob -
Due to variable lighting conditions
it might be best to manually
adjust the white balance to
reproduce clear accurate
color reproduction.
By placing the
Auto WB in the
off position the
user can then
manually adjust
for correct color
reproduction.
Power On/Off
Negative/Positive
Button - Negative film
material can be
converted and viewed
as a positive image
when captured with
the camera with the
negative/positive
switch active.
Button - Negative film
material can be
converted and viewed
as a positive image
when captured with
the camera with the
negative/positive
switch active.
Audio Mute On/Off -
When an auxiliary
microphone is connected
to the camera the sound
can be active or muted.
When an auxiliary
microphone is connected
to the camera the sound
can be active or muted.
AGC Lock On/Off -
Lock the image
brightness level or
adjust brightness
automatically.
Lock the image
brightness level or
adjust brightness
automatically.
Electronic Shutter Switch -
Is utilized if there is problems
with screen flicker. The
switch should be set to
the appropriate power
frequency where
the camera is
installed.
- In areas with
60 Hz power:
Set the selector
to 1/60. (US users
should leave the switch
set to 1/60).
- In areas with 50 hz
power: Set the selector
to 1/100.
to 1/100.
Auto White Balance Button (On/Off) - The auto white balance feature
of the camera will automatically try to produce accurate color reproduction
of images being captured. Basically the camera will try its best to
accurately reproduce clear accurate whites, reds, blues, and greens.
of the camera will automatically try to produce accurate color reproduction
of images being captured. Basically the camera will try its best to
accurately reproduce clear accurate whites, reds, blues, and greens.
VIZCAM’S CONTROL PANEL FEATURES USER-FRIENDLY FUNCTIONS: