Digitus Internet Broadband Router with 4 Port N-Way Switch DN-11004-O ユーザーズマニュアル

 

 

38

 

 Here will show you the installed firmware version on this router. Make sure that   

the firmware you want to use is saved on the local hard drive of your computer. Click 

 button to update router’s firmware. Then direct the file path and click “Upload”.   

Upgrading the firmware will not change any of your system settings but it is recommended that you 

save your system settings before doing a firmware upgrade. 

z 

Enter the password of this router. 

z 

 Enter the new password of this router you want to change. Please keep the   

password safely. If you forgot your password, you have to reset your router by clicking the reset button in 

the rear panel of this router.   
z 

 Re-type the new password. 

z  WAN MAC Change:

 If you want ot change the default 

 is set to the 

WAN’s   

physical interface 

on the Router, enter the

MAC Address 

you want to reset. 

z 

This router allow outside user configure this router. This function also been   

called as Remote Management. It allows the device to be configured through the WAN (Wide Area 

Network) port from the Internet using a web browser. A username and password is still required to access 

the browser-based management interface. Enter the IP Address of outside user to allow access into this