PocketWizard Plus III 801-130 プリント
製品コード
801-130
MAKE IT POSSIBLE
™
PocketWizard.com
info@pocketwizard.com
Features & Functions:
Specifications:
Frequency: FCC/IC
340.00 - 354.00 MHz
CE
433.42 - 334.42 MHz
Channels:
32 channels
1-16 Standard channels
17-32 Selective Quad-Zone Triggering channels
Reverse compatible with all PocketWizard radios of the same frequency*
using Standard or Quad-Zone Triggering channels
(*FCC and CE PocketWizard radios work on different frequencies)
Zones:
A - B - C - D
Compatible with other PocketWizard radios with Quad-Zone
Triggering channels
Antenna:
Precision tuned internal coil
Display:
Backlit 2.5cm (1.0”) liquid crystal display (LCD)
Range:
Up to 500 Meters (1600 feet) (Actual range is dependent on multiple factors
including equipment, mode, environment, positioning, orientation and interference)
Sync speed:
Up to 1/250 (focal plane)
Up to 1/500 (leaf shutter)
Triggering Speed:
Up to 14.5 FPS
Contact Time:
62 milliseconds in normal operation
2 milliseconds in High Speed Receive (HSR) Mode
Status Indicator:
LED: Green, Amber, Red status indications
Transmit Output Power:
Less than 1 milliwatt (0.001 watt)
Power:
Two (2) AA (IEC:LR6) alkaline recommended
NiMH, NiCAD, NiZn, Lithium acceptable (these chemistries may not
report battery life accurately)
USB (optional AC adapter PW-AC-USB available)
Battery life:
Up to 50 hours (with alkaline batteries)
Max Port Sync Voltage:
300 Volts (Camera/Flash Port)
Max Current Handling
1.0 A peak, 0.2 A (1/5 Amp or 200 milliamp) continuous current limited
Voltage Present:
3 volts, safe for use with all digital and film cameras
USB:
USB 2.0 Mini-B Connector
Housing:
High impact plastic with captive battery door
Weight:
120 grams (4 ounces) with batteries installed
Dimensions
Height: 13.3cm (5.25”) | Width: 5.1cm (2.00”) | Depth: 3.2cm (1.25”)
Operating Temperature:
Above -15° C (5° F) and below 50° C (120° F).
Storage Temperature:
Above -30° C (-22° F) and below 85° C (185° F) (without battery)
Input/Output:
3.5mm (1/8”) stereo miniphone jack, hot shoe
Mounting:
Hot shoe, lanyard/D-Ring loop, ¼-20 threaded insert
In the Box:
Quick Guide, Stereo 3.5mm (1/8”) miniphone to miniphone cable, Mono
3.5mm miniphone to locking PC cable, Stereo 3.5mm miniphone to 6.35mm
(¼”) adapter, Lanyard, Operation reference sticker
Optional Accessories:
Isolation bar, trigger buttons, camera motor drive cables, PC cables and
adapters, flash sync cables and protective case
32 Channels
With 32 channels (16 standard plus 16 Quad-Zone Triggering channels), the
PocketWizard Plus III Transceiver enables you to trigger individual or groups of
lights simultaneously or individually. This is critical for working in crowded venues
or with multiple lighting set-ups. It is also ideal for remote cameras at sporting
events or weddings. The Plus III Transceiver is also the perfect partner for the
MultiMAX
PocketWizard Plus III Transceiver enables you to trigger individual or groups of
lights simultaneously or individually. This is critical for working in crowded venues
or with multiple lighting set-ups. It is also ideal for remote cameras at sporting
events or weddings. The Plus III Transceiver is also the perfect partner for the
MultiMAX
®
radio.
Quad-Zone Triggering
Selective Quad-Zone Triggering keeps you shooting photos, not running back and
forth to your lighting or cameras. Without leaving the camera position, you can
wirelessly activate or deactivate your remote flashes or cameras in 4 separately
controllable zones: A, B, C, or D. This is ideal when using multiple lighting setups
or turning remote cameras on and off as needed.
forth to your lighting or cameras. Without leaving the camera position, you can
wirelessly activate or deactivate your remote flashes or cameras in 4 separately
controllable zones: A, B, C, or D. This is ideal when using multiple lighting setups
or turning remote cameras on and off as needed.
Auto-Sensing Transceiver
With our patented Auto-Sensing Transceiver technology, the Plus III Transceiver
is one smart radio. When set to TxRx, it will instantly and intelligently switch
between transmitter and receiver modes as needed for greater flexibility on the
job. The Plus III may be set to transmit (Tx) or receive (Rx) only when needed.
is one smart radio. When set to TxRx, it will instantly and intelligently switch
between transmitter and receiver modes as needed for greater flexibility on the
job. The Plus III may be set to transmit (Tx) or receive (Rx) only when needed.
Two-Stage Remote Camera Triggering
The Plus III Transceiver is the perfect solution for remote camera triggering. The
unique two-stage TEST button on the Plus III works just like the shutter release
button on your camera. Press it halfway and your remote camera wakes up to
meter and focus. Press TEST all the way to take your photo. When released, your
remote camera will return to sleep mode normally; a real battery saver.
unique two-stage TEST button on the Plus III works just like the shutter release
button on your camera. Press it halfway and your remote camera wakes up to
meter and focus. Press TEST all the way to take your photo. When released, your
remote camera will return to sleep mode normally; a real battery saver.
Auto-Relay Mode
Our Auto-Sensing Transceiver technology lets you trigger a remote camera in
sync with remote flashes using only 3 PocketWizard radios: the one in your
hands, a Plus III cabled to your remote camera, and the one connected to your
remote flash.
sync with remote flashes using only 3 PocketWizard radios: the one in your
hands, a Plus III cabled to your remote camera, and the one connected to your
remote flash.
Long Range Capability
Under ideal conditions, the Plus III Transceiver works up to 500 meters (1600
feet). Shooting environments are seldom ideal, so the Plus III incorporates two
range extending modes for the challenges of the real world. Use Long Range
Mode (LR) to nearly double the effective triggering distance in almost any
environment.
feet). Shooting environments are seldom ideal, so the Plus III incorporates two
range extending modes for the challenges of the real world. Use Long Range
Mode (LR) to nearly double the effective triggering distance in almost any
environment.
Repeater Mode (RP)
In very challenging environments or extremely long working ranges, place a
Plus III in Repeater Mode (RP) between your transmitter and receiver to repeat
the signal and complete the connection. These modes take a little extra time to
do their jobs, so maximum X-sync may be reduced when firing remote flashes
in LR or RP modes.
Plus III in Repeater Mode (RP) between your transmitter and receiver to repeat
the signal and complete the connection. These modes take a little extra time to
do their jobs, so maximum X-sync may be reduced when firing remote flashes
in LR or RP modes.
High Speed Receive
Under ideal conditions, the Plus III Transceiver works up to 500 meters (1600
feet). Shooting environments are seldom ideal, so the Plus III incorporates two
range extending modes for the challenges of the real world.
feet). Shooting environments are seldom ideal, so the Plus III incorporates two
range extending modes for the challenges of the real world.
Sleek New Design
The Plus III features a durable, side profile design with an unobtrusive, internal
antenna minimizing visual obstruction between you and your subject. By utilizing
an internal antenna, there’s no chance to kink or break it when on location.
The total height of the transceiver and antenna is less than 5.25 inches, and it
weighs only 4 ounces, including batteries.
antenna minimizing visual obstruction between you and your subject. By utilizing
an internal antenna, there’s no chance to kink or break it when on location.
The total height of the transceiver and antenna is less than 5.25 inches, and it
weighs only 4 ounces, including batteries.
External Power and Firmware Upgradeable
The Plus III is normally powered by two AA (IEC:LR6) batteries. For long term
remote placement, use an AC adapter that plugs into the standard Mini-B USB
port of the Plus III. The USB port also enables future upgrades of the Plus III
operating system.
remote placement, use an AC adapter that plugs into the standard Mini-B USB
port of the Plus III. The USB port also enables future upgrades of the Plus III
operating system.
Very Compatible
The Plus III is compatible with all PocketWizard radios of the same frequency*
including PocketWizard-enabled photo gear from Profoto, Dynalite, Norman,
Photogenic and Sekonic light meters. The PocketWizard wireless system allows
for total flexibility with whatever lights or cameras you may be working with.
including PocketWizard-enabled photo gear from Profoto, Dynalite, Norman,
Photogenic and Sekonic light meters. The PocketWizard wireless system allows
for total flexibility with whatever lights or cameras you may be working with.
(*FCC and CE PocketWizard radios work on different frequencies)
Simple User Interface
The Plus III has an intuitive user interface where all channels, zones and modes
can be easily engaged via a soft-touch keypad, and displayed on an easy-to-read
backlit 2.5cm (1”) LCD display. When you’re working in dark environments,
simply press any key other than TEST to Illuminate the LCD.
can be easily engaged via a soft-touch keypad, and displayed on an easy-to-read
backlit 2.5cm (1”) LCD display. When you’re working in dark environments,
simply press any key other than TEST to Illuminate the LCD.
v1.1 - February 2012
Note:
Information subject to change. Visit PocketWizard.com for the most up to
date product information.